Bedienungsanleitung Siemens EM645CQB5M (Seite 14 von 24) (Englisch)

790966

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en PowerBoost function

Once the time has elapsed

The hotplate switches off. A beep sounds and in the

time program function display ‹‹ appears for

10 seconds. The Ú indicator on the hotplate lights up.

Pressing the 0 symbol turns off the indicators and

stops the beeping.

Notes

■If a cooking time has been set for several hotplates,

the cooking time that was set last appears in the

timer display.

■To select the remaining cooking time for a different

hotplate, touch the 0 symbol repeatedly until the

indicator for the desired hotplate lights up.

■You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. The kitchen timer can be set in two different ways:

– If a hotplate has been selected, touch the

0 symbol repeatedly until the Ú indicator beside

the V symbol lights up.

– If no hotplate has been selected, touch the

0 symbol. The Ú indicator beside the V symbol

lights up.

‹‹ appears on the timer display.

2. Touch the @ or A symbol. The basic setting is

displayed.

@ symbol: 10 minutes.

A symbol: 05 minutes.

3. Use the @ or A symbol to set the required time.

After a few seconds, the time begins to count down.

Changing or deleting the time

Touch the symbol 0 repeatedly until the Ú indicator

lights up beside the V symbol. Change or set the time

to ‹‹ using the @ or A symbol.

Once the time has elapsed

A warning signal sounds. ‹‹ is displayed on the time

program function display. After 10 seconds the

indicators turn off.

Pressing the 0 symbol turns off the indicators and

stops the beeping.

vPowerBoost function

Po we r Bo o s t functi on

The PowerBoost function enables you to heat up large

quantities of water faster than when using heat setting

Š.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise, the › symbol and the

heat setting will flash in the hotplate display; the

previously selected heat setting will then be set

automatically without activating the function.

Note: In the combi zone, the PowerBoost function can

only be activated if the two hotplates are used

independently of each other.

Activation

1. Selecting the required heat setting.

2. Touch the & symbol for the selected hotplate.

› lights up on the display.

The function is activated.

Deactivation

Touch the & symbol.

› goes out on the display and the hotplate switches

back to the previously selected heat setting.

The function is deactivated.

Note: In certain circumstances, the PowerBoost

function can switch itself off automatically in order to

protect the electronic elements inside the hob.





Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EM645CQB5M Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EM645CQB5M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info