332599
13
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
Home troubleshooting
You do not always need to call the technical assistance service.
Very often, you can solve the problem on your own. The
following table contains a few pieces of advice.
Important note:
Only authorised personnel from our Technical Services
Department can carry out work on the gas and electrical supply
systems.
Problem Probable cause Solution
11
- The automatic safety
switch has tripped or
a fuse has blown.
- Check the fuse in the main
fuse box and change it if it is
damaged.
The general electrical
system is
malfunctioning
- Defective fuse.
- Check the main fuse box to
see whether the automatic
trip switch or a differential
switch has tripped.
The electric sparker
does not work
- There is waste from food
or cleaning products
between the ignition
sparker and the burner.
- The burner covers are
not located correctly.
- The burners are wet.
- The space between the
ignition sparker and the
burner must be carefully
cleaned.
- Make sure that the burner
covers are correctly located.
- Dry the burner covers
carefully.
The flames on the
burners are not uniform
- The different parts of the
burner have been
improperly assembled.
- The grooves on the
burners' gas outlets are
dirty.
- Place the different pieces
correctly.
- Clean the grooves on the
burners' gas outlets.
The gas flow does not
appear to be normal or
no gas comes out
- The gas mains are
turned off.
- If gas is supplied from a
gas bottle, it may be
empty.
- Replace the gas bottle with
a full one.
- Turn on all stop cocks.
There is a smell of gas
in the kitchen area
- There may be a leak from the
coupling to the gas bottle.
- A gas tap has been left on.
- Check to see if any gas taps
are on.
- Check that the coupling is
correct.
The safety devices on
the different burners
don't work
- The grooves on the
burners' gas outlets are
dirty.
- The control knob was
not held down long
enough.
- Clean the grooves on the
burners' gas outlets.
- Once the burner is lit, hold
the control knob down a few
seconds longer.
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens er 947501 inox wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info