Bedienungsanleitung Siemens ET845FN17E (Seite 9 von 16) (Englisch)

527445

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

When the cooking time has elapsed

When the cooking time has elapsed, the hotplate switches off.

You will hear a signal and

‹‹ lights up in the display for 10

seconds. The

x indicator lights up brightly. Touch the 0

symbol. The displays go out and the audible signal ceases.

Changing or cancelling the cooking time

Select the hotplate and touch the

0 symbol. The x display

lights up brightly. Change the cooking time or set to

‹‹ in the

settings range.

Note: You can set a cooking time of up to 99 minutes.

Automatic timer

You can use this function to preselect a cooking time for all

hotplates. Each time a hotplate is switched on, the preselected

cooking then counts down. When the cooking time has

elapsed, the hotplate switches off automatically.

You can find out how to switch on the automatic timer in the

Basic settings section.

Note: You can change the cooking time for a hotplate or switch

off the automatic timer for the hotplates.

Select the hotplate and touch the

0 symbol. The desired x

display lights up brightly. Change the cooking time or set to

‹‹

in the settings range.

Kitchen timer

You can use the kitchen timer to set a time of up to 99 minutes.

It runs independently of all the other settings.

Switching on the kitchen timer

You can switch the kitchen timer on in 2 different ways:

■ If a hotplate has been selected, touch the 0 symbol twice

within 10 seconds.

■ If a hotplate has not been selected, touch the 0 symbol.

The

V display lights up.

Setting the kitchen timer

Set the desired time in the settings range.

When the cooking time has elapsed

After the time has elapsed, you hear an audible signal.

‹‹

lights up in the timer display. The

V display for the kitchen

timer lights up brightly. After 10 seconds, the display switches

off.

Displaying the time

Use the

0 symbol to select the kitchen timer. The time is

displayed for 10 seconds.

Changing the time

Use the

0 symbol to select the kitchen timer and reset the

time.

Automatic time limit

If a hotplate has been switched on for a long time without the

setting being changed, the automatic time limit is activated.

The hotplate stops heating.

” ‰ and the •/œ residual heat

indicator flash alternately on the hotplate display.

The display goes out when you touch any control. You can

make new settings.

When the time limit is activated depends on the heat setting

selected (1 to 10 hours).

Wipe protection

If you wipe over the control panel while the hob is switched on,

settings may be altered.

To prevent this from happening, your hob has a control panel

pause function. Touch the

‚/$ symbol. A signal sounds. The

display light above the

‚/$ lights up. The control panel is

locked for 30 seconds. You can now wipe over the control

panel without altering any settings.

Note: The main switch is excluded from the control panel

pause function. You can switch off the hob at any time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ET845FN17E Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ET845FN17E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info