Bedienungsanleitung Siemens ET875LMP1D (Seite 6 von 16) (Englisch)

788231

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

en Operating the appliance

Combination cooking zone

The single and dual-circuit hotplate can be operated

without the bridge heating element independently of

each other or combined with the bridge heating

element as described in the table.

The small roasting zone (1 + 3) and the single-circuit

hotplate (2) can also be operated independently of

each other with different heat settings. Different

temperature ranges are therefore generated at the large

roaster, the teppan yaki or the grill plate, for example:

the small roasting zone can then be used to fry a meal

and the single-circuit hotplate can simultaneously be

used to keep a meal warm.

Note: Suitable cookware is available from the after-

sales service or our e-Shop.

Residual heat indicator

The hob has a two-stage residual heat indicator for

each hotplate.

If • appears in the display the hob is still hot. It may be

used, for example, to keep a small meal warm or to

melt cooking chocolate. As the hotplate cools down

further, the display changes to œ. The display remains lit

until the hotplate has cooled sufficiently.

1Operating the appliance

Oper at i ng the appl i ance

In this section, you can find out how to set the

hotplates. The table shows heat settings and cooking

times for various meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.

Switching on the appliance

Touch the # symbol. A signal sounds. The indicator

light above the main switch lights up. The control

displays and the heat setting displays ‹ light up. The

hob is ready for use.

The two front hotplates are automatically selected. The

‹ heat setting displays light up brightly.

Switching off the appliance

Touch the # symbol until the indicator light above the

main switch and the displays go out. All hotplates are

switched off. The residual heat indicator remains on

until the hotplates have cooled down sufficiently.

Notes

■The hob will switch itself off automatically once all

hotplates have been switched off for a while (10-

60 seconds).

■The settings remain stored for 4 seconds after the

hob has been switched off. If you switch it on again

during this time, the hob will operate using the

previously stored settings.

Setting a hotplate

Select the desired heat setting on the control panel.

Heat setting 1 = Lowest power

Heat setting 9 = Highest power

Every heat setting has an intermediate setting. It

appears on the display, e.g. as ….†.

Selecting the heat setting

The hob must be on.

1. Touch the ‹ heat setting display to select the

hotplate.

‹ lights up brightly on the heat setting display

2. Select the required heat setting on the control panel.

The hotplate is switched on.

Changing the heat setting:

Select the hotplate and set the required heat setting on

the control panel.

Switching off the hotplate

Select the hotplate. Set the control panel to 0. After

about 10 seconds, the residual heat indicator appears.

Note: The last selected hotplate remains activated. You

can set the hotplate without selecting it again.

1 = dual-circuit hotplate

2 = single-circuit hotplate

3 = bridge heating element

Combination Activation Suitable for

Small roasting

zone:

Combination of 1

+ 3

With the ˆ symbol activate

the bridge heating element.

ˆ symbol lights up

brightly.

Small roaster

Small teppan yaki

Large roasting

zone:

Combination of 1

+ 3 + 2

Touch the Ô symbol

Ô symbol lights up brightly.

Large roaster

Large teppan yaki

Large grill plate







Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ET875LMP1D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ET875LMP1D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info