Bedienungsanleitung Siemens ET975LVP1D (Seite 6 von 16) (Englisch)

655354

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

en Operating the appliance

â Hotplates with bridge heating element

Two individual hotplates can be interconnected with a

bridge heating element to create one large extended

cooking zone.

With normal operation these hotplates both work as

normal single-circuit and dual-circuit hotplates.

Activating the bridge heating element:

■ When both hotplates are switched off, touch the ç

symbol. ‹ appears in the heat setting display. Select

the required heat setting in the control panel.

■ When one of the hotplates is switched on, touch the

ç symbol. The selected heat setting is adopted.

■ When both hotplates are switched on, touch the ç

symbol.‹ appears in the heat setting display. Select

the required heat setting in the control panel.

To deactivate the extended cooking zone: touch the ç

symbol again. The display goes out. The extended

cooking zone is deactivated.

Note: If you activate the extended cooking zone, the

outer filament circuit of the dual-circuit hotplate is

automatically deactivated.

Residual heat indicator

The hob has a two-stage residual heat indicator for

each hotplate.

If • appears in the display the hob is still hot. It may be

used, for example, to keep a small meal warm or to

melt cooking chocolate. As the hotplate cools down

further, the display changes to œ. The display remains lit

until the hotplate has cooled sufficiently.

1Operating the appliance

Operating the appliance

In this section, you can find out how to set the hotplates.

The table shows heat settings and cooking times for

various meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.

Switching on the appliance

Touch the # symbol. A signal sounds. The indicator

light above the main switch lights up. The control

displays and the heat setting displays ‹ light up. The

hob is ready for use.

The two front hotplates are automatically selected. The

‹ heat setting displays light up brightly.

Switching off the appliance

Touch the # symbol until the indicator light above the

main switch and the displays go out. All hotplates are

switched off. The residual heat indicator remains on

until the hotplates have cooled down sufficiently.

Notes

■ The hob switches off automatically if all hotplates

have been switched off for longer than 20 seconds.

■ The settings remain stored for 4 seconds after the

hob has been switched off. If you switch it on again

during this time, the hob will operate using the

previously stored settings.

Setting a hotplate

Select the desired heat setting on the control panel.

Heat setting 1 = Lowest power

Heat setting 9 = Highest power

Every heat setting has an intermediate setting. It

appears on the display, e.g. as ….†.

Selecting the heat setting

The hob must be on.

1. Touch the ‹ heat setting display to select the

hotplate.

‹ lights up brightly on the heat setting display

2. Select the required heat setting on the control panel.

The hotplate is switched on.

Changing the heat setting:

Select the hotplate and set the required heat setting on

the control panel.

Switching off the hotplate

Select the hotplate. Set the control panel to 0. After

about 10 seconds, the residual heat indicator appears.

Note: The last selected hotplate remains activated. You

can set the hotplate without selecting it again.

Table of cooking times

The following table provides some examples.

Cooking times and heat settings may vary depending

on the type of food, its weight and quality. Deviations

are therefore possible.

For bringing liquids to the boil, use heat setting 9.

Stir thick liquids occasionally.

Food that needs to be seared quickly or food which

loses a lot of liquid during initial frying is best seared in

several small portions.

Tips for energy-saving cooking can be found in the

Environmental protection section.~ Page 4

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens ET975LVP1D Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens ET975LVP1D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info