Bedienungsanleitung Siemens EX375FXB1E (Seite 15 von 28) (Englisch)

641249

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Time-setting options en

OTime-setting options

Time-setting options

Your hob has three timer functions:

■ Programming the cooking time

■ Kitchen timer

■ Stopwatch function

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select the hotplate and the required heat setting.

2. Touch the 0 symbol twice. The x indicator for the

hotplate lights up. ‹‹ lights up in the timer display.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

After a few seconds, the time begins to elapse.

Note: The same cooking time can be set automatically

for all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically programming

the cooking time in section ~ "Basic settings"

Changing or deleting the time

Select the hotplate and then touch the 0 symbol twice.

Change the cooking time in the control panel or set ‹‹

to delete the programmed cooking time.

When the time has elapsed

The hotplate switches off. An audible signal sounds. In

the timer display, the ‹‹ indicators and the x symbol

beside the heat setting flash for 10 seconds.

When the 0 symbol is touched, the displays go out

and the audible signal ceases.

Notes

■ If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■ You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. Touch the 0 symbol repeatedly until the V

indicator lights up. ‹‹ lights up on the timer display.

2. Set the required time in the control panel.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the 0 symbol repeatedly until the V indicator

lights up. Change the time in the control panel or set it

to ‹‹.

When the time has elapsed

An audible signal sounds. ‹‹ and the V indicator flash

in the timer display. The displays go out after 10

seconds.

When the 0 symbol is touched, the displays go out

and the audible signal ceases.

Stopwatch function

The stopwatch function displays the time that has

elapsed since activation.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Activating

When you touch the 0, the þ indicator lights up.‹‹

lights up in the timer display.

Then slide your finger across the control panel.

The cooking time begins to elapse.

Deactivating

Touch the 0 symbol; the þ display lights up.

Slide your finger over the control panel. ‹‹ appear in

the timer display and then go out.

The function is deactivated.

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX375FXB1E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX375FXB1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info