Bedienungsanleitung Siemens EX607LYV5E (Seite 14 von 48) (Englisch)

788208

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

en Flex Zone

|Flex Zone

Fl e x Zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As a single hotplate

The flexible cooking zone is activated as a single

hotplate.

Activating

1. Select the flexible cooking zone by touching the Ä

symbol.

2. Select the required heat setting from the settings

area.

The flexible cooking zone has now been activated.

Changing the heat setting

Select the hotplate and change the heat setting in the

relative settings area.

Adding a new item of cookware

Set the new piece of cookware down on the hotplate

and then touch the ý symbol twice. The new piece of

cookware will be detected and the heat setting that was

previously selected will be retained.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Deactivating

Touch the ý symbol.

This deactivates the flexible cooking zone. The two

hotplates will now function independently.

As two independent hotplates

Use the flexible cooking zone as two independent

hotplates.

Disconnecting hotplates

1. Touch the ý symbol.

2. Select the required hotplate by touching the "

symbol.

3. Select the required heat setting from the settings

area.

The hotplate is activated.

Notes

■If the hob switches itself off and then on again, the

flexible cooking zone is used as a single hotplate

again.

■To change the configuration settings for the flexible

cooking zone, refer to section ~ "Basic settings".

Linking the two hotplates

Touch the ý symbol.

The flexible cooking zone has now been activated.

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Recommendations

If the hob has more than one flexible

cooking zone, place the cookware on

top so that it covers only one of the flex-

ible cooking zones.

Otherwise, the hotplates will not be

activated as intended and the cooking

result will not be satisfactory.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX607LYV5E Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX607LYV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info