Bedienungsanleitung Siemens EX677FEC5E (Seite 15 von 32) (Englisch)

790957

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

en Time-setting options

OTime-setting options

Ti me- s et t i ng opt i ons

Your hob has two timer functions:

■Programming the cooking time

■Kitchen timer

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Select the hotplate and the required heat setting.

2. Touch the 0 symbol. x lights up on the display for

the hotplate.‹‹ lights up on the timer display.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

After a few seconds, the time begins to elapse.

Notes

■The same cooking time can be set automatically for

all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically

programming the cooking time in section ~ "Basic

settings"

■If the flexible cooking zone is selected as the only

hotplate, the set time for the entire cooking zone is

the same.

Frying sensor

If a cooking time has been programmed for a hotplate

and the frying sensor has been activated, the cooking

time will not begin to count down until the selected

temperature setting has been reached.

Changing or cancelling the time

Select the hotplate and then press the 0 symbol.

Change the cooking time using the programming zone

or set to ‹‹ in order to cancel the time.

Once the time has elapsed

The hotplate switches off. A warning signal sounds. The

time program function lights up ‹‹ for 10 seconds in

the display.

When the 0 symbol is pressed, the indications turn off

and the beeping stops.

Notes

■If a cooking time was programmed for several

hotplates, the time information for the selected

hotplate is shown in the timer display.

■You can set a cooking time of up to 99 minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. Touch the 0 symbol repeatedly until the V

indicator lights up. ‹‹ lights up on the timer display.

2. Set the required time in the control panel.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the 0 symbol repeatedly until the V indicator

lights up. Change the time in the control panel or set it

to ‹‹.

When the time has elapsed,

An audible signal sounds. ‹‹ appears in the timer

display and the V indicator lights up. The displays go

out after 10 seconds.

When the 0 symbol is touched, the indicators go out

and the acoustic signal ceases.

 

PowerBoost function en

vPowerBoost function

Power Boost f unc t i on

The PowerBoost function enables you to heat up large

quantities of water faster than when using heat setting

Š.

This function can always be activated for a hotplate,

provided the other hotplate in the same group is not in

use (see illustration). Otherwise, › and Š will flash in

the display for the selected hotplate; the Š heat setting

will then be set automatically without activating the

function.

Note: The PowerBoost function can also be activated in

the flexible area if the cooking zone is being used as a

single hotplate.

Activation

1. Select a hotplate.

2. Touch the & symbol.

› lights up on the display.

The function is activated.

Deactivation

1. Select the hotplate.

2. Touch the & symbol.

The › display goes out and the hotplate switches

back to the Š heat setting.

The function is deactivated.

Note: In certain circumstances, the PowerBoost

function can switch itself off automatically in order to

protect the electronic elements inside the hob.

cFrying Sensor

Fr y i n g Sensor

This function can be used to fry food while maintaining

the suitable frying pan temperature.

The cooking zones that have this function are identified

by the roasting function symbol.

Advantages when frying

■The hotplate only heats up if this is required to

maintain the temperature. This saves energy and

prevents the oil or fat from overheating.

■The frying function reports when the empty frying

pan has reached the optimum temperature for

adding oil and then for adding the food.

Notes

■Do not place a lid on the pan. Otherwise, the

function does not activate correctly. You can use a

splash guard to prevent splashes of grease.

■Use suitable oil or fat for frying. If butter, margarine,

extra virgin olive oil or lard is used, set heat setting

˜.

■Never leave a frying pan, with or without food,

unattended when it is being heated.

■If the hotplate is a higher temperature than the

cookware or vice versa, the frying sensor will not be

activated correctly.

Frying pans for the frying sensor

Frying pans specifically suited for use with the frying

sensor are available. These optional accessories can

be purchased from specialist retailers or through our

technical after-sales service. Always quote the relevant

reference number.

■HZ390210 15 cm frying pan.

■HZ390220 19 cm frying pan.

■HZ390230 21 cm frying pan.

■HZ390512 teppan yaki. Recommended for the

flexible cooking zone only.

■HZ390522 griddle plate. Recommended for the

flexible cooking zone only.

These frying pans have a non-stick coating so that you

can fry food with only a small amount of oil.

Notes

■The frying sensor has been configured specifically

for this type of frying pan.

■Ensure that the diameter of the base of the frying

pan corresponds to the size of the hotplate. Put the

frying pan in the centre of the hotplate.

■Using a frying pan of a different size or one that is

poorly positioned on the flexible cooking zones may

result in the frying sensor not being activated. See

the section on ~ "Flex Zone".

■Other frying pans may overheat. They may reach a

temperature above or below the selected

temperature setting. Try the lowest temperature

setting to begin with and change it if necessary.





Siemens EX677FEC5E Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX677FEC5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info