Bedienungsanleitung Siemens EX808LYV5E (Seite 38 von 48) (Englisch)

788209

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

en Hood connection

eHood connection

Ho o d c onnect i on

You can connect this appliance to a suitable extractor

hood and then control the functions of the hood via your

hob.

You have various options for connecting the appliances

together:

Home Connect

Two appliances can be connected using the Home

Connect app provided that both of them are Home

Connect-compatible.

Both appliances can be controlled via the app and via

the control panel.

Refer to the Home Connect documents supplied and

the Home Connect section for more information.

~ "Home Connect" on page 33

Connecting appliances directly

If the appliance is connected directly to an extractor

hood, the extractor hood can be controlled via the hob.

It is then not possible for either of the appliances to

connect to your home network or to the app. Both

appliances can be controlled via the control panel.

Connecting appliances via your home network

Use this type of connection if neither or one of the two

appliances is connected to the Home Connect app.

If the appliances are connected to each other via your

home network, you can use both the hood controls and

Home Connect to operate the hob.

Notes

■Make sure you follow the safety instructions in the

instruction manual for your extractor hood and that

these are complied with even when operating the

appliance via the hood controls on the

hob.~ "Important safety information" on page 6

■If the appliance is being operated by means of the

controls on the extractor hood, this mode of

operation always has priority. It is not possible to use

the hood controls on the hob during this time.

■In networked standby mode, your appliance requires

a maximum of 2 W.

Setting up

To set up the connection between the hob and the

extractor hood, the hob must be switched on.

Connecting directly

Make sure that the extractor hood is switched off.

For more information refer to the section entitled

"Connecting to the hob" in the instruction manual for

your extractor hood.

Note:

If you connect your hob directly to the extractor hood, it

cannot be connected to your home network as well and

you will not be able to use Home Connect.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ lights up in the hotplate display.

4. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

5. You have two minutes to initiate the connection

process on the extractor hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX808LYV5E Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX808LYV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info