788209

Siemens EX808LYV5E Seite 43

43
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
en Frequently Asked Questions (FAQ)
42
Cookware
Which types of cookware can be used with an induction hob?
For information on which items of cookware are suitable for induction cooking, see the section entitled ~ "Induction cooking".
Why is the cooking zone not heating up and why are the power level and the ZoneLight lights flashing?
The cooking zone that is switched on does not match the position of the cookware.
Ensure that the power level for the cooking zone on which the cookware is standing is activated.
The cookware is too small for the cooking zone that is switched on or it is not suitable for induction cooking.
Make sure that the cookware is suitable for induction cooking and that the cookware is placed on the cooking zone which is more appro-
priate for the size of the cookware. You can find information on the type, size and positioning of the item of cookware in the sections enti-
tled ~ "Induction cooking", ~ "Flex Zone" and ~ "Move function".
Why does the cookware heat up so slowly or why does the cookware not heat up sufficiently, even though a high power level has been set?
The cookware is too small for the cooking zone that is switched on or it is not suitable for induction cooking.
Make sure that the cookware is suitable for induction cooking and that the cookware is placed on the cooking zone which is more appro-
priate for the size of the cookware. You can find information on the type, size and positioning of the item of cookware in the sections enti-
tled ~ "Induction cooking", ~ "Flex Zone" and ~ "Move function".
Cleaning
How do I clean the hob?
Using a special glass-ceramic cleaning agent produces the best results. We advise against using harsh or abrasive cleaning agents, dish-
water detergent (concentrated) or scouring pads.
You can find more information on cleaning and caring for your hob in the section on ~ "Cleaning"
Trouble shooting en
43
3Trouble shooting
Tr oubl e shoot i ng
Usually, faults are small matters that are easy to
eliminate. Please read the information in the table
before calling the after-sales service.
Display Possible cause Solution
None The power supply has been disconnected. Use other electrical appliances to check whether a short circuit
has occurred in the power supply.
The appliance has not been connected as shown
in the circuit diagram.
Make sure that the appliance has been connected as shown in
the circuit diagram.
Electronics fault. If the fault cannot be rectified, inform the technical after-sales ser-
vice.
The displays flash. The control panel is damp or there is something
on it.
Dry the control panel or remove the object.
The Ù indicator flashes in the
cooking zone displays.
A fault has occurred in the electronics. To acknowledge the fault, briefly cover the control panel with
your hand.
”ƒ/“ˆ‹‚† The electronics have overheated and have
switched off the affected cooking zone.
Wait until the electronics have cooled down sufficiently. Then
touch any symbol on the control panel.
”…/“ˆ‹‚† /“‹ˆƒƒ/
“‹‰ƒƒ/ “‹Šƒƒ/
“‹ˆƒ„/“‹‰ƒ„/
“‹Šƒ„
The electronics have overheated and all of the
cooking zones have been switched off.
Ӡ + power level and audible
signal
There is hot cookware near the control panel.
There is a risk that the electronics will overheat.
Remove the cookware that is causing the problem. The fault dis-
play goes out shortly afterwards. The cooking process can be
continued.
Ӡ and audible signal There is hot cookware near the control panel.
The cooking zone has been switched off to pro-
tect the electronics.
Remove the cookware that is causing the problem. Wait a few
seconds. Touch any touch control. When the fault display goes
out, you can resume cooking.
”‚/”‡ The cooking zone has overheated and has been
switched off to protect the work surface.
Wait until the electronics have cooled down sufficiently. Then
switch the cooking zone on again.
”‹ The transfer settings function cannot be acti-
vated.
Confirm the fault display by touching any sensor. You can cook as
usual without using the transfer settings function. Contact our
technical after-sales service.
”Š The FlexPlus cooking zone cannot be activated. Confirm the fault display by touching any sensor. You can use the
other cooking zones to cook as usual. Contact our technical after-
sales service.
”‰ The cooking zone has been operating continu-
ously for an extended period.
The automatic safety cut-out function has been activated. See the
section entitled
“ˆ‹‚‹ The hob is unable to connect to your home net-
work or the extractor hood.
Confirm the fault display by touching any sensor. You can cook as
usual without a connection.
If the message appears again, contact our technical after-sales
service.
“Š‹‹‹
“Š‹‚‹
The operating voltage is incorrect and outside of
the normal operating range.
Contact your electricity supplier.
—…‹‹ The hob is not connected correctly. Disconnect the hob from the mains. Ensure that the hob has been
connected as shown in the circuit diagram.
š“ Demo mode is activated. Disconnect the hob from the mains. Wait for 30 seconds before
reconnecting it. Touch any sensor in the next three minutes.
Demo mode has now been deactivated.
Do not place hot cookware on the control panel.
… 43 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens EX808LYV5E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens EX808LYV5E

Siemens EX808LYV5E Bedienungsanleitung - Deutsch - 28 seiten

Siemens EX808LYV5E Bedienungsanleitung - Holländisch - 28 seiten

Siemens EX808LYV5E Bedienungsanleitung - Französisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info