Bedienungsanleitung Siemens EX845LYC1E (Seite 11 von 36) (Englisch)

790758

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operating the appliance en

1Operating the appliance

Operating the appliance

This chapter explains how to set a hotplate. The table

shows heat settings and cooking times for various

meals.

Switching the hob on and off

Switch the hob on and off using the main switch.

To switch on: Touch the # symbol. An audible signal

sounds. The symbols for the hotplates and the functions

available at this time light up. The hob is ready to use.

To switch off: Touch the # symbol until the indicators

go out. The residual heat indicator remains lit until the

hotplates have cooled down sufficiently.

Notes

■The hob switches off automatically if all hotplates

have been switched off for more than 20 seconds.

■The selected settings are stored for four seconds

after the hob has been switched off. If you switch it

on again during this time, the hob will operate using

the previously stored settings.

Setting a hotplate

Set the desired heat setting in the settings area.

Heat setting 1 = lowest setting.

Heat setting 9 = highest setting.

Every heat setting has an intermediate setting. This is

marked with †.

Note: The left-hand hotplates are set in the settings

area on the left and the right-hand hotplates are set in

the settings area on the right.

Selecting a hotplate and heat setting

The hob must be switched on.

1. Touch the " and Ä symbols for the required

hotplate.

The ‹ indicator gets brighter.

2. Swipe your finger over the relative settings area until

the required heat setting lights up.

The heat setting is set.

Changing the power level

Select the hotplate and set the desired power level in

the programming zone.

Switch off the hotplate

Select the hotplate and set it to ‹ in the programming

panel. The hotplate turns off and the residual heat

indicator appears.

Notes

■If no pan has been placed on the hotplate, the

selected power level flashes. After a certain time has

elapsed, the hotplate switches off.

■If a pan has been placed on the hotplate before

switching on the hob, it will be detected within

20 seconds of pressing the main switch and the

hotplate will be selected automatically. Once

detected, select the power level within the next

20 seconds or the hotplate will switch off.

Chef's recommendations

Recommendations

■When heating up puree, cream soups and thick

sauces, stir occasionally.

■Set heat setting 8 to 9 for preheating.

■When cooking with the lid on, turn the heat setting

down as soon as steam escapes between the lid

and the cookware. Steam does not need to escape

for a good cooking result.

■After cooking, keep the lid on the cookware until you

serve the food.

■To cook with the pressure cooker, observe the

manufacturer's instructions.

■Do not cook food for too long, otherwise the

nutrients will be lost. The kitchen clock can be used

to set the optimum cooking time.

■For a more healthy cooking result, smoking oil

should be avoided.

■To brown food, fry small portions in succession.

■Cookware may reach high temperatures while the

food is cooking. We recommend that you use oven

gloves.

■You can find recommendations for energy-efficient

cooking in section ~ "Environmental protection"

 

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX845LYC1E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX845LYC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info