Bedienungsanleitung Siemens EX845LYC1E (Seite 17 von 36) (Englisch)

790758

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Time-setting options en

OTime-setting options

Time-setting options

Your hob has three timer functions:

■Programming the cooking time

■Kitchen timer

■Stopwatch function

Programming the cooking time

The hotplate automatically switches off after the time

that is set has elapsed.

Setting procedure:

1. Touch the 0 symbol twice. ‹‹ and the x indicator

light up in the timer display.

2. Select the hotplate. The x indicator lights up.

3. Within the next 10 seconds, set the required cooking

time in the settings range.

4. Touch the 0 symbol to confirm the selected setting.

5. Select the required heat setting.

The cooking time begins to elapse.

Notes

■The same cooking time can be set automatically for

all hotplates. The set time for each of the hotplates

counts down independently.

You can find information on automatically

programming the cooking time in section ~ "Basic

settings"

■If the flexible cooking zone is selected as the only

hotplate, the set time for the entire cooking zone is

the same.

■If the Move function is selected for the combined

hotplate, the set time for the three hotplates is the

same.

Frying sensor

If a cooking time has been programmed for a hotplate

and the frying sensor has been activated, the cooking

time will not begin to count down until the selected

temperature setting has been reached.

Changing or deleting the time

Touch the 0 symbol twice and then select the hotplate.

Change the cooking time in the settings area or set ‹‹

to delete the programmed cooking time.

Touch the 0 symbol to confirm the selected setting.

When the time has elapsed

The hotplate switches itself off, the x indicator flashes

and the hotplate displays ‹. An audible signal sounds.

‹‹ and the x indicator flash in the timer display.

When the 0 symbol is touched, the indicators go out

and the acoustic signal ceases.

Notes

■If a cooking time has been programmed for several

hotplates, the shortest cooking time appears in the

timer display.

■To query a hotplate's remaining cooking time, touch

the 0 symbol twice and select the hotplate.

■You can set a cooking time of up to ŠŠ minutes.

The kitchen timer

You can use the kitchen timer to set a time of up to 99

minutes.

This functions independently from the hotplates and

from other settings. This function does not automatically

switch off a hotplate.

Setting procedure

1. Touch the 0 symbol.‹‹ and the V indicator light

up in the timer display.

2. Select the required time in the settings area and

confirm this setting by touching the 0 symbol.

After a few seconds, the time begins to elapse.

Changing or deleting the time

Touch the 0 symbol.

Change the cooking time in the settings area or set ‹‹

to delete the programmed cooking time.

Touch the 0 symbol to confirm the selected setting.

When the time has elapsed

An audible signal sounds once the time has elapsed.

‹‹ and the V symbol flash in the timer display.

The indicators go out after touching the 0 symbol.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX845LYC1E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX845LYC1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info