Bedienungsanleitung Siemens EX875KYV1E (Seite 20 von 28) (Englisch)

790757

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Hob-based hood control

23.4 Changing settings via the

HomeConnect app

You can use the HomeConnect app to change the set-

tings for the cooking zones and send them to the hob.

Requirements

¡The hob is connected to the Wi-Fi and to the

HomeConnect app.

¡In order to set the hob via the HomeConnectapp,

the basic setting "Setting via the app" must be

switched on. The basic setting is switched on on de-

livery. If the option for the transmission of settings

has been deactivated, only the hob's operating

statuses will be displayed in the HomeConnect app.

1. Select the setting in the HomeConnect app and

send it to the hob.

Follow the instructions in the HomeConnect app.

Settings that you send from the HomeConnect app

to the hob must be confirmed on the hob.

aIf cooking settings are transmitted to a cooking

zone, the display shows a message.

2. To confirm a setting, touch "Apply".

3. To discard the setting, touch "Discard".

23.5 Software update

Your appliance's software can be updated using the

software update function, e.g. for the purposes of op-

timisation, troubleshooting or security updates.

To do this, you must be a registered HomeCon-

nectuser, have installed the app on your mobile device

and be connected to the HomeConnectserver.

As soon as a software update is available, you will be

informed via the HomeConnectapp and will be able to

start the software update via the app. Once the update

has been successfully downloaded, you can start in-

stalling it via the HomeConnectapp if you are in your

WLAN home network (Wi-Fi). The HomeConnectapp

will inform you once installation is successful.

Notes

¡You can continue to use your appliance as normal

while updates are downloading. Depending on your

personal settings in the app, software updates can

also be set to download automatically.

¡We recommend that you install security updates as

soon as possible.

23.6 Remote diagnostics

Customer Service can use Remote Diagnostics to ac-

cess your appliance if you contact them, have your ap-

pliance connected to the HomeConnect server and if

Remote Diagnostics is available in the country in which

you are using the appliance.

Tip:For further information and details about the avail-

ability of Remote Diagnostics in your country, please

visit the service/support section of your local website:

www.home-connect.com

23.7 Data protection

Please see the information on data protection.

The first time your appliance is registered on a home

network connected to the Internet, your appliance will

transmit the following types of data to the

HomeConnect server (initial registration):

¡Unique appliance identification (consisting of appli-

ance codes as well as the MAC address of the Wi-Fi

communication module installed).

¡Security certificate of the Wi-Fi communication mod-

ule (to ensure a secure data connection).

¡The current software and hardware version of your

appliance.

¡Status of any previous reset to factory settings.

This initial registration prepares the HomeConnect

functions for use and is only required when you want to

use the HomeConnect functions for the first time.

Note:Please note that the HomeConnect functions

can only be utilised with the HomeConnect app. In-

formation on data protection can be retrieved in the

HomeConnect app.

24 Hob-based hood control

If both appliances are HomeConnect-compatible, con-

nect the appliances in the HomeConnectapp. To do

this, connect the two appliances to HomeConnect and

follow the instructions in the app.

Notes

¡Using the controls on the extractor hood always

takes priority. It is not possible to use the hob-based

hood control during this time.

¡In networked standby mode, the appliance requires

a maximum of2W.

¡You can only connect to the extractor hood via the

HomeConnect app. Other connection routes are no

longer supported.

24.1 Resetting HomeConnect settings

If you have problems connecting your appliance to the

WLAN home network (Wi-Fi) or if you want to log your

appliance onto a different WLAN home network (Wi-Fi) ,

you can reset the HomeConnect settings.

Note:If you reset the HomeConnect settings, the con-

nection to any extractor hood will also be terminated.

1. Touch ⁠ to open the basic settings.

2. Select the "Hood control" setting.

3. Touch "Disconnect".

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX875KYV1E Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX875KYV1E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info