Bedienungsanleitung Siemens EX877NVV6E (Seite 8 von 28) (Englisch)

788219

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Before using for the first time

5.4 Cooking zone

Before you start cooking, check whether the size of the

cookware fits the cooking zone that you want to use for

cooking:

Area Cooking zone type

⁠ Flex Zone

→"flexInduction", Page10

⁠ Single-circuit cooking zone

5.5 Residual heat indicator

The hob has a residual heat indicator for each cooking

zone. Do not touch the cooking zone if the residual

heat indicator is lit.

Display Meaning

⁠ The cooking zone is hot.

⁠ The cooking zone is warm.

6 Before using for the first time

Observe the following recommendations.

6.1 Setting Home Connect

When you first switch on the appliance, you are promp-

ted to set up your home network. The ⁠symbol lights

up for a few seconds on the display panel.

To begin setting up the connection, touch the

⁠sensor and proceed in accordance with the informa-

tion given in the section entitled

→"HomeConnect ", Page17. To exit initial set-up,

touch any sensor.

7 Basic operation

7.1 Switching on the hob

▶Touch ⁠.

The symbols for the cooking zones and the cur-

rently available functions light up.

aThe hob is ready for use.

reStart

▶If you switch the appliance on within four seconds of

switching it off, the hob operates with the settings

that were previously set.

7.2 Switching the hob off

▶Touch ⁠ until the displays go out.

aAll cooking zones are switched off.

Note:If all of the cooking zones are switched off for

longer than 20seconds, the hob is automatically

switched off.

7.3 Setting the power level in the cooking

zones

The cooking zone has 17 power levels, which are dis-

played from ⁠ to ⁠ with intermediate values. Select the

best power level for the food and the planned cooking

process.

1. Touch ⁠ for the required cooking zone.

aThe ⁠display lights up brighter.

2. Select the required power level in the settings area.

aThe power level has been set.

Note:If no cookware is placed on the cooking zone or

the pot is not suitable, the selected power level flashes.

After a certain period of time, the cooking zone

switches itself off.

quickStart

▶If you place cookware on the hob before you switch

it on, the cookware is detected when you switch on

and the corresponding cooking zone is selected

automatically. Select the power level in the next 20

seconds, or the hob switches itself off.

Changing the power level and switching off the

cooking zone

1. Select the cooking zone.

2. Select the required power level in the settings area

or set it to ⁠.

aThe cooking zone's power level changes or the

cooking zone switches itself off and the residual

heat indicator appears.

7.4 Cooking tips

¡When heating up puree, cream soups or thick

sauces, stir occasionally.

¡To preheat, set the power level 8-9.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX877NVV6E Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX877NVV6E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info