Bedienungsanleitung Siemens EX877NVV6E (Seite 16 von 28) (Englisch)

788219

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

en Cookware test

Display Setting Value

⁠ ⁠ Power limitation

Enables the total power of the hob to be lim-

ited, if necessary, based on the conditions of

your electrical installation. The available set-

tings depend on the maximum power of the

hob. You can find precise information on the

rating plate. If the function is active and the

hob has reached the set power limit, ⁠ is dis-

played and you cannot select a higher power

level.

⁠ - Switched off. Maximum power of the hob 1.

⁠ - 1000 W. Lowest power setting.

⁠. - 1500 W.

...

⁠ - 3000 W. Recommended for 13 A.

⁠. - 3500 W. Recommended for 16 A.

⁠ - 4000 W.

⁠. - 4500 W. Recommended for 20 A.

...

⁠ - Maximum power of the hob.

⁠ ⁠ ⁠ powerMove Plus

Allows you to change the preset power levels

for the three cooking areas of the flexible

cooking zone.

Select one of the two cooking zones, set the

required power level in the settings area and

touch ⁠ to confirm the new power level.

⁠ - Preset power level for the front cooking zone.

⁠ - Preset power level for the middle cooking zone.

⁠. ⁠ - Preset power level for the rear cooking zone.

⁠ ⁠ ⁠ Cookware test

You can use this function to test the quality

of the cookware.

⁠ - Not suitable.

⁠ - Not optimal.

⁠ - Suitable.

⁠ ⁠ ⁠ flexInduction

Change the switch-on mode for the Flex

Zone.

⁠ - As two independent cooking zones.

⁠ - As a connected cooking zone.1

⁠ ⁠ Restoring factory settings ⁠ - Individual settings 1.

⁠ - Factory settings.

1Factory setting

19.2 To go to the basic settings

Requirement:The hob must be switched off.

1. To switch on the hob, touch ⁠.

2. Within the next 10 seconds, press and hold ⁠ for 4

seconds.

Product information Display

Directory for the technical after-sales

service (TK)

⁠ ⁠

Production number ⁠ ⁠

Production number 1 ⁠ ⁠.

Production number 2 ⁠. ⁠

aThe first four displays provide the product informa-

tion. To call up the individual displays, touch the

control panel.

3. Touch ⁠ to access the basic settings.

a⁠ ⁠ and ⁠ light up as a presetting.

4. Touch ⁠ repeatedly until the desired setting ap-

pears.

5. Select the required setting in the settings area.

6. Touch and hold ⁠ for 4seconds.

aThe settings are saved.

19.3 Discarding changes to the basic

settings

▶Touch ⁠.

aAll changes are discarded and not saved.

20 Cookware test

The quality of the cookware has a major influence on

the speed and the result of the cooking process.

You can use this function to test the quality of the cook-

ware.

Before the test, ensure that the size of the cookware

base corresponds to the size of the cooking zone be-

ing used.

Access is via the basic settings. →Page15

20.1 Carrying out Cookware test

As a single cooking zone, the flexible cooking zone is

set in such a way that only the individual item of cook-

ware is checked.

1. At room temperature, place the cookware with ap-

prox.200ml water in the centre of the cooking zone

that best fits the base of the cookware in terms of

size.

2. Call up the basic settings and select ⁠ ⁠ ⁠.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX877NVV6E Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX877NVV6E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info