Bedienungsanleitung Siemens EX878LYV5E (Seite 11 von 48) (Englisch)

788206

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

en Getting to know your appliance

*Getting to know your

appliance

Get t i ng to k now your appl i ance

You can find information on the dimensions and power

of the hotplates in~ Page 2

Note: . Depending on the appliance model, individual

details and colours may differ.

The control panel

Selection sensors

When the hob heats up, the symbols for the controls

available at this time light up.

Touch a symbol to activate the function it represents.

Notes

■The corresponding symbols for the controls light up,

depending on whether they are available.

■Always keep the control panel clean and dry.

Moisture can prevent it from working properly.

■Do not place cookware close to the displays and

sensors. The electronics may overheat.

Touch controls

#Main switch

" / ÄSelect the cooking zone

0 IIIIIIIIIIII Settings range

&PowerBoost and ShortBoost functions

ýFlexible cooking zone

ÿMove function

ÑLock the control panel for cleaning and childproof lock

èKeep-warm function

ÕFrying sensor

0Set the cooking time and kitchen timer

þStopwatch function

DWi-Fi

IHood control

=Extractor hood lighting

Indicators/symbols

‹Operating status

‚-ŠHeat settings

•/œResidual heat

›PowerBoost function

›ØShortBoost function

–Keep-warm function

£Transfer settings

ÝFrying sensor

üFlexPlus cooking zone

‹‹ Timer function

xSet the cooking time

VTimer

ö / ôTime units on the timer

‚Childproof lock

DWi-Fi

Getting to know your appliance en

The hotplates

When you switch on the hob, lights surrounding the

hobs light up. These lights are considered to be

ZoneLight lights. After you have placed one or more

pots on the hob, the lights on the cooking zones being

used light up.

You can find out how to make the ZoneLight lights

switch on permanently in the section entitled ~ "Basic

settings".

Residual heat indicators

The hob has two residual heat indicators for every

cooking zone. These indicators show that the cooking

zone is still hot. Do not touch the cooking zone while

the indicators are still lit or immediately after they have

gone out.

Depending on the amount of residual heat, the following

is shown:

■ • display: High temperature

■ œ display: Low temperature

If you remove the pot from the cooking zone during

cooking, the residual heat indicator and the selected

power level flash alternately.

If you switch off the cooking zone, the residual heat

indicator lights up. If the hob has already been switched

off, the residual heat indicator remains lit for as long as

the cooking zone remains warm.

If you switch off the cooking zone, the ZoneLight lights

light up and the residual heat is displayed.

Hotplate

ÛSimple hotplate Use cookware that is a suitable size.

áFlexible cooking zone See section ~ "Flex Zone"

à / ßFlexPlus cooking zone The FlexPlus cooking zones always switch on in conjunction with the right- or left-hand flexible cook-

ing zone. See section ~ "FlexPlus Zone"

Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX878LYV5E Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX878LYV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info