Bedienungsanleitung Siemens EX907KXX5E (Seite 17 von 60) (Englisch)

790749

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Flex Zone

|Flex Zone

Fl e x Zone

You can use each flex zone as a single hotplate or as

two independent hotplates, as required.

It consists of four inductors that work independently of

each other. If using the flexible cooking zone, only the

area that is covered by cookware is activated.

Advice on using cookware

To ensure that the cookware is detected and heat is

distributed evenly, correctly centre the cookware:

As a single hotplate

The flexible cooking zone is activated as a single

hotplate.

Activation

1. Select the flexible cooking zone.

2. Select the heat setting you require from the settings

area. The heat setting and the indicator showing the

active cooking mode will be lit in the centre of the

flexible cooking zone.

The Flex cooking zone has now been activated.

To change the heat setting:

Select the flexible cooking zone and adjust the heat

setting to the setting you require in the settings area.

Adding new cookware

Place the new item of cookware onto the flexible

cooking zone and follow the instructions on the display

panel.

Note: If the cookware is moved to the hotplate being

used or lifted up, the hotplate begins an automatic

search and the heat setting selected previously is

retained.

Deactivating

Select the flexible cooking zone and set the heat setting

to 0. The flexible cooking zone will switch itself off and

the residual heat indicator will appear.

As two independent hotplates

Use the flexible cooking zone as two independent

hotplates.

Unlinking the two hotplates

Touch the ` symbol. The heat setting and the indicator

showing the active cooking mode will be lit at the

hotplate on which the cookware is placed.

The flexible cooking zone functions as two independent

hotplates.

Linking the two hotplates

Touch the ` symbol. The heat setting and the indicator

showing the active cooking mode will be lit in the centre

of the flexible cooking zone.

The flexible cooking zone functions as a single hotplate.

Notes

■If the hob switches itself off and then on again, the

flexible cooking zone is used as a single hotplate

again.

■To change the configuration settings for the flexible

cooking zone, refer to section ~ "Basic settings".

As a single hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the four posi-

tions that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the three

positions that can be seen in the illustration.

If the cookware takes up more than one

hotplate, place it starting on the upper or

lower edge of the flexible cooking zone.

As two independent hotplates

The front and rear hotplates each have two induc-

tors and can be used independently of each other.

Select the required heat setting for each of the

hotplates. Use only one item of cookware on each

hotplate.

Middle hotplate

Diameter smaller than or equal to 13 cm

Place the cookware on one of the three positions

that can be seen in the illustration.

Diameter greater than 13 cm

Place the cookware on one of the two positions

that can be seen in the illustration.

If the cookware occupies more than two induc-

tors, place it starting from the upper or the lower

edge of the hotplate.

Recommendations

If the hob has more than one flexible

cooking zone, place the cookware on

top so that it covers only one of the flex-

ible cooking zones.

Otherwise, the hotplates will not be

activated as intended and the cooking

result will not be satisfactory.

Move function en

uMove function

Move f unct i on

This function activates the entire flexible cooking zone,

which is divided into three cooking areas and which has

preset heat settings.

Only use one item of cookware. The size of the cooking

area depends on the cookware used and whether it is

positioned correctly.

This means that an item of cookware can be moved

during the cooking process to another cooking area

with another heat setting:

Preset power settings:

Front section = power setting 9.0

Middle section = power setting 5.0

Rear section = power setting è

The preset power settings can be changed

independently of one another. You can find out how to

change these in section ~ "Basic settings".

Notes

■If more than one item of cookware is detected on the

flexible cooking zone, the function is deactivated.

■If the cookware is moved within the flexible cooking

zone or lifted up, the hob automatically starts

searching and the heat setting of the area in which

the vessel was detected is set.

■You can find information on the size and positioning

of the cookware in the section on ~ "Flex Zone"

Activation

1. Select a hotplate from the flexible cooking zone.

2. Touch the active cooking mode.

3. Select the ÿ powerMove option.

This function has now been activated.

To change the heat setting:

The heat settings for the individual cooking areas can

be changed as you cook. Touch the symbol for the

cooking area you require and adjust the heat setting in

the settings area.

Note: If the function is deactivated, the heat settings for

the three cooking areas are reset to the preset values.

Deactivating

Select the cooking area and touch the Switch off button

in the settings area. The hotplate will switch itself off and

the residual heat indicator will appear.

This function has now been deactivated.

Cooking areas

Siemens EX907KXX5E Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX907KXX5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info