Bedienungsanleitung Siemens EX907KXX5E (Seite 37 von 60) (Englisch)

790749

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Wireless temperature sensor

Dish assistant

This function can be used to cook a wide variety of

food.The appliance will choose the optimal setting for

you.

Selecting and setting the programme

1. Select a hotplate.

2. Touch the active cooking mode and select the Dish

assistant option.

3. Select the programme group you require.

4. Select the type of food you want to cook.

You will be guided through the entire setting procedure

for the food you have selected, and will be provided

with information on how to cook it.

Cancelling a programme

To cancel a programme, select power setting 0 or

change the type of heating.

‚Wireless temperature

sensor

Wi r el es s t emper at ur e sens or

You will need to connect the wireless temperature

sensor to the control panel before using the cooking

functions for the first time.

Preparing and maintaining the wireless

temperature sensor

This section provides information on:

■Adhering the silicone patch

■Using the wireless cooking sensor

■Cleaning

■Changing the battery

The silicone patch and the cooking sensor can be

purchased at a later time from specialist retailers, our

technical after-sales service or our official website. To

do this, quote the relevant reference number:

Adhering the silicone patch

The silicone patch attaches the temperature sensor to

the cookware.

When a pan is used for the first time with the cooking

functions, the silicone patch must be adhered directly to

the pan. It is important

1. That the adhesive area on the pan is free from

grease. Clean the pan, dry it thoroughly and wipe the

adhesive area with a spirit.

2. Remove the protective film from the silicone patch.

Adhere the silicone patch to the outside of the pan in

the correct place using the enclosed template as a

guide.

3. Press down all over the surface of the silicone patch,

including in the centre.

The adhesive requires one hour to fully harden. Do not

use or clean the pan during this time.

Notes

■Do not leave the pan with the silicone patch to soak

soapy water for long periods of time.

■If the silicone patch comes off, attach a new one.

00577921 Set of 5 silicone patches

HZ39050 Cooking sensor and set of 5 silicone patches

Wireless temperature sensor en

Fitting the wireless temperature sensor

Attach the temperature sensor to the silicone patch and

align it correctly.

Notes

■Make sure that the silicone patch is completely dry

before attaching the temperature sensor.

■Position the cookware in such a way that the

temperature sensor is pointing towards the outer

side of the hob.

■To prevent overheating, the temperature sensor

must not be pointed towards another item of

cookware that is hot.

■Remove the temperature sensor from the saucepan

after cooking. Store it in a clean, safe place away

from sources of heat.

■You can use up to three temperature sensors at the

same time.

Connecting the wireless temperature sensor

to the control panel

To connect the wireless temperature sensor to the

control panel, follow the instructions below:

1. Open the docking menu.

2. Open the basic settings and select "Cooking sensor"

from the menu.

3. Select the Add a new cooking sensor option.

Press the » symbol on the wireless temperature

sensor within 30 seconds.

After a few seconds, the status of the connection

between the temperature sensor and the control

panel will appear on the display.

The cooking functions are made available once the

cooking sensor has been connected to the control

panel correctly.

Notes

■If there is a fault with the cooking sensor, the

connection may not be established correctly for the

following reasons:

– Bluetooth communication error.

– The symbol on the cooking sensor was not

pressed within 30 seconds.

– The battery in the cooking sensor is drained.

Reset the cooking sensor and repeat the connection

procedure.

■If the temperature sensor and the control panel are

not connected correctly due to a transmission error,

repeat the connection procedure.

If the display continues to indicate a connection

error, contact our technical after-sales service.

Resetting the wireless temperature sensor

1. Touch the » symbol on the cooking sensor for

approximately 8-10 seconds.

While you are doing this, the temperature sensor's

LED indicator will light up three times. When the LED

lights up for the third time, it will start to reset the

temperature sensor. Stop touching the symbol when

this happens.

Once the LED goes out, this means that the wireless

temperature sensor has been reset.

2. Repeat the connection procedure.

Cleaning

Do not clean the wireless temperature sensor in the

dishwasher.

Temperature sensor

Clean the temperature sensor with a damp cloth. Never

clean it in the dishwasher. Do not immerse it in water or

clean it under running water.

Remove the temperature sensor from the saucepan

after cooking. Store it in a clean, safe place (such as in

its packaging) away from sources of heat.

Silicone patch

Clean and dry before attaching to the temperature

sensor. Dishwasher safe.

Note:

Cookware with the silicone patch must not be left to

soak for long periods in soapy water.

Temperature sensor window

The sensor window must always be clean and dry.

Proceed as follows:

■Remove dirt and oil splatters regularly.

■Use a soft cloth or cotton buds and window cleaner

for cleaning.

Notes

■Do not use abrasive cleaning agents such as

scouring pads, scrubbing brushes or cream

cleaners.

■Do not touch the sensor window with your fingers.

This may make it dirty or scratch it.

Siemens EX907KXX5E Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX907KXX5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info