Bedienungsanleitung Siemens EX907LXV5E (Seite 31 von 44) (Englisch)

788197

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Power manager

hPower manager

Po we r manager

You can use the power manager to set the total power

of the hob.

The hob is preset at the factory. Its maximum

performance is specified on the rating plate. You can

use the power manager to change the value in

accordance with the requirements for the relevant

electrical installation.

In order not to exceed this set value, the hob

automatically distributes the power available between

the cooking zones that are switched on.

As long as the power manager function is activated, the

output of a cooking zone may temporarily fall below the

nominal value. If a cooking zone is switched on and the

power limit is reached, ¬ appears in the heat setting

display for a short time. The appliance automatically

regulates and selects the highest possible power level.

For more information about how the total power of the

hob is changed, see section ~ "Basic settings"

oHome Connect

Ho me Connec t

This appliance is WLAN-enabled and settings can be

sent to the appliance via a mobile device.

If the appliance is not connected to the home network,

the appliance functions in the same way as a hob with

no network connection. The hob can always be

operated via the control panel.

The availability of the Home Connect function depends

on the availability of Home Connect services in your

country. Home Connect services are not available in

every country.You can find more information on this at

www.home-connect.com.

Notes

■Hobs are not designed to be used unattended - you

must always keep an eye on the cooking process.

■Ensure that you follow the safety instructions in this

instruction manual and that these are also observed

when operating the appliance via the Home Connect

app. You must also follow the instructions in the

Home Connect app.~ "Important safety

information" on page 5

■Using the Home Connect app, you can send settings

to your appliance and then have to confirm them on

the appliance. It is not possible to operate the

appliance whilst you are away from home.

■Operation on the appliance always has priority.

During this time, it is not possible to operate the

appliance using the Home Connect app.

Setting up

To implement settings via Home Connect, you must

have installed and set up the Home Connect app on

your mobile device.

Observe the Home Connect documents supplied for

this.

Follow the steps specified by the app to make the

settings.

The app must be open in order to perform the setup

process.

Home Connect en

Automatic registration in the home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Manually logging into your

home network".

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

4. Set the ‚ value in the control panel.

In the control panel, ‚ and the symbol D flash.

5. Press the WPS button on the router within the next

two minutes.

If the D symbol no longer flashes in the control

panel but, instead, lights up constantly, the hob is

connected to the home network.

Note:

If no connection can be established, the value ƒ

"Connect manually" appears. Manually log the

appliance into the home network or restart the

automatic connection.

The appliance automatically tries to connect to the

app and the setting •’ƒ is displayed. The value ‚

flashes in the control panel.

6. Start the app on the mobile device and follow the

instructions for automatic network registration.

The registration procedure has been completed once

the ‹ value appears on the cooking position display.

Manual registration in the home network

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

4. Set the ƒ value in the control panel.

In the control panel, ƒ and the symbol D flash.

5. Use the "Home Connect" SSID and the "Home

Connect" key to log your mobile device into the hob

network.

If the D symbol no longer flashes in the control

panel but, instead, lights up constantly, the hob is

connected to the home network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens EX907LXV5E Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX907LXV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info