Bedienungsanleitung Siemens EX977LVV5E (Seite 33 von 44) (Englisch)

751194

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Home Connect

The appliance automatically tries to connect to the

app and the setting •’ƒ is displayed. The value ‚

flashes in the control panel.

6. Start the app on the mobile device and follow the

instructions for manual network registration.

The registration procedure has been completed once

the ‹ value appears on the cooking position display.

Home Connect settings

You can adjust Home Connect to suit your

requirements at any time.

In the basic settings for your hob, navigate to the Home

Connect settings to display network and appliance

information.

Notes

■The •’ƒ setting is only displayed if the appliance is

connected to the home network.

■The •’„ setting is only displayed if the appliance

has once connected to a network.

■The •’† setting is only displayed if an update is

available.

■The •’‡ setting is only displayed if Customer

Service is attempting to connect to the appliance.

You can end this at any time after granting access.

■The •’ˆ and •’‰ settings are only displayed if

there is a connection to WLAN.

Deactivating Wi-Fi

If Wi-Fi has been activated, you can use the Home

Connect functions.

Note:

In networked standby mode, your appliance requires a

maximum of 2 W.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’„

setting appears.

‚ lights up on the cooking position display.

4. Set the ‹ value on the control panel.

This deactivates Wi-Fi; the D symbol will go out on the

control panel.

Symbol Function

•’‚ Registration in the home network (WLAN)

‹Not connected /disconnect network.

‚Connect automatically.

ƒConnect manually.

„Connected.

•’ƒ Connection to app

‹Not connected.

‚Connect.

•’„ Connect to WLAN

‹Radio module switched off.

‚Radio module switched on.

•’… Settings via app

‹Switched off.

‚Switched on.*

•’† Software update

‚Update available and ready for installation.

ƒStarting installation.

•’‡ Remote access by Customer Service

‹Not permitted.

‚Permitted.

* Basic setting

•’ˆ WLAN signal strength

‹ Not connected to home network (WLAN).

‚ Signal strength 1 (poor)

ƒ Signal strength 2 (moderate)

„ Signal strength 3 (good)

•’‰ Connection to Home Connect server

‹Not connected.

‚Connected.

Symbol Function

* Basic setting

Home Connect en

Disconnecting from the network

Di s c onnect i ng f r om t he net wor k

You can disconnect your hob from the network at any

time.

Note:

If your hob is disconnected from the network, it is not

possible to operate it using Home Connect.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

„ lights up on the cooking position display.

4. Set the ‹ value on the control panel.

This disconnects the appliance from your home

network; the D symbol will go out on the control panel.

Connecting to the network

Connect i ng to t he net wor k

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’‚

setting appears.

‹ lights up on the cooking position display.

4. On the control panel

set the "Connect automatically" ‚ value or

or the "Connect manually" ƒ value.

5. Follow the instructions as per ~ "Automatic

registration in the home network" or ~ "Manual

registration in the home network".

Connect to the app

If the Home Connect app is installed on your mobile

device, you can connect it to your hob.

Notes

■The appliance must be connected to the network.

■The app must be open and be set up.

■If your extractor hood is directly connected, first

disconnect the hob from your home network and

then initiate the connection process

again.~ "Disconnecting from the network"

on page 33~ "Connecting to the network"

on page 33

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’ƒ

setting appears.

‹ lights up on the cooking position display.

4. Set the ‚ value on the control panel.

5. Follow the instructions in the app to complete the

connection process.

Settings via app

Using the Home Connect app, you can easily access

the basic settings for your hob and send settings for the

cooking zones to the hob.

Notes

■Before you can change the basic settings, the hob

must be switched off.

■If the appliance is being operated by means of the

controls on the appliance itself, this mode of

operation always has priority. During this time, it is

not possible to operate the appliance using the

Home Connect app.

■When the appliance is delivered, the settings

transmission option is already activated by default.

■If the settings transmission option has been

deactivated, only the hob's operating statuses will be

displayed in the Home Connect app.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the •’…

setting appears.

4. To activate the transfer, select the ‚ value on the

control panel. To deactivate the transfer, select the ‹

value.

Siemens EX977LVV5E Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX977LVV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info