Bedienungsanleitung Siemens EX977LVV5E (Seite 37 von 44) (Englisch)

751194

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

en Hood connection

Connecting via your home network

You require a router that has WPS functionality.

You require access to your router.If you do not have

this, follow the steps for "Direct connection".

When you begin, make sure that the extractor hood is

connected to the app or is on your home network.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

‹ (not connected) or ƒ (connected to home

network) will be lit on the hotplate display.

4. Set the value ‚ in the settings area.

‚ flashes in the hotplate display.

5. If the appliance is not yet connected to your home

network, press the WPS button on the router within

the next 2 minutes.

The hob will be connected to your home network

and the value ƒ will appear on the hotplate display.

The process of connecting to the extractor hood

starts automatically and is active for 2 minutes.

If the appliance is already connected to your home

network, proceed to the next step.

6. Initiate the process for connecting to the extractor

hood.

Once the hob is connected to the extractor hood, the

value „ appears in the hotplate display. After you exit

the settings menu, the symbols for the hob-based hood

controls are displayed in the hob's control panel.

Note:

Connection can only be established when both

appliances are connected to your home network and

the connection process has been initiated for both of

them. If the connection process has already timed out

for one of the two appliances, try to connect again

(basic settings, ™‚‡ setting).

Disconnecting from the network

Di sc onnect i ng f r om t he net wor k

You can reset the connections you have saved for your

home network and extractor hood at any time.

1. Switch on the hob.

2. Touch and hold the 0 symbol for four seconds.

The product information is displayed.

3. Touch the 0 symbol repeatedly until the ™‚‡

setting appears.

4. Set the ‹ value on the control panel.

The connection has been restored.

Control the hood via the hob

In the basic settings of your hob you can adjust the

behaviour of your extractor hood depending on the

switch-on/off of the hob or individual cooking zones.

~ "Hood control settings" on page 37

You can select other settings using the control panel.

Setting the fan

Activation

1. Touch the I symbol.

2. Select the fan level.

You can choose between the levels 1, 2 and 3. To

select the intensive levels, touch buttons 4 or 5, or

touch the & button repeatedly until the required

intensive level is set.

The fan has been activated.

Deactivating

1. Touch the I symbol.

2. Select fan setting 0.

The fan has been deactivated.

Setting automatic mode

Activation

Touch the I symbol until the ‘ symbol appears on the

control panel.

The fan starts up automatically when steam is

produced.

Deactivating

Touch the I symbol until the ‘ symbol goes out, or

select another fan level.

Automatic mode is deactivated.

Setting the hood lighting

You can switch the hood light on and off via the hob's

control panel.

Touch the = symbol.

Cleaning en

Hood control settings

Hood c ont r ol set t i ngs

You can adapt the hood controls to suit your needs at

any time.

Note:

The ™‚‰, ™ƒ‹, ™ƒ‚ and ™ƒƒ settings are only

displayed if the appliance is connected to an extractor

hood.

DCleaning

Cl eani ng

Suitable maintenance and cleaning products can be

purchased from the after-sales service or in our e-Shop.

Hob

Cleaning

Always clean the hob after cooking. This will prevent

food deposits from becoming burned on. Only clean the

hob after the residual heat indicator has gone out.

Clean the hob with a damp dish cloth and dry it with a

cloth or towel to prevent limescale build-up.

Only use cleaning agents that are suitable for this type

of hob. Observe the manufacturer's instructions on the

product packaging.

Never use:

■Undiluted washing-up liquid

■Cleaning agents designed for dishwashers

■Abrasive cleaners

■Harsh cleaning agents, such as oven spray and

limescale remover

■Scouring pads

■High-pressure cleaners or steam jet cleaners

Stubborn dirt is best removed with a glass scraper,

available from retailers. Observe the manufacturer's

instructions.

You can obtain a suitable glass scraper from customer

services or through our online shop.

Using a special sponge for cleaning glass-ceramic

hobs achieves a great cleaning result.

Note: Do not use any cleaning agents while the hob is

still hot. This may mark the surface. Make sure that any

residue left by cleaning agents is removed.

Hob surround

To prevent damage to the hob surround, observe the

following instructions:

■Only use warm soapy water

■Wash new dish cloths thoroughly before use.

■Do not use harsh or abrasive cleaning agents.

■Do not use a glass scraper or sharp objects.

Symbol Function

™‚‡ Hob-hood connection

‹Not connected / disconnect.

‚Connect.

ƒConnected to home network (WLAN).

„Connected to extractor hood.

™‚‰ Automatic fan switch-on

‹Switched off.

The hood must be switched on manually if needed.

‚Switched on in automatic mode.*

In automatic mode, the hood switches itself on when a

cooking zone is switched on.

ƒSwitched on in manual mode.

The hood switches itself on with a default setting when a

cooking zone is switched on.

™ƒ‹ Fan run-on

‹The fan switches itself off when the hob is switched off.

‚Switched on in automatic mode.*

ƒSwitched on with standard fan run-on.

„No change in settings.

™ƒ‚ Switch light on automatically

‹Switched off.

‚Switched on.*

The light switches itself on when the hob is switched on.

™ƒƒ Switch light off automatically

‹Switched off.*

‚Switched on.

The light switches itself off when the hob is switched off.

* Basic setting

Potential marks

Limescale and water

marks

Clean the hob as soon as it has cooled down.

You can use a cleaning agent suitable for

glass-ceramic hobs.*

Sugar, rice starch or

plastic

Clean immediately. Use a glass scraper. Cau-

tion: Risk of burns.*

* Then clean with a damp dish cloth and dry with a cloth or towel.

Siemens EX977LVV5E Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens EX977LVV5E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info