788207
41
Zoom out
Zoom in
Vorherige Seite
1/52
Nächste Seite
Hood control en
41
Connecting via your home network
You require a router that has WPS functionality.
Access to your router is required. If you do not have
this, follow the steps listed under "Direct connection".
When you begin, make sure that the extractor hood is
connected to the same home network.
1. Touch the ® symbol in the docking menu to open
the basic settings.
2. Select the Hood control cookConnect hood control
setting.
3. Touch "Connect to network".
4. Press the WPS button on the router within the next
2 minutes.
A message will be displayed to notify you when the
hob is successfully connected to your home
network.
5. You have 2 minutes to initiate the connection
process on the extractor hood.
A message is displayed to notify you when the hob is
successfully connected to the extractor hood. The
symbols for the hood controls on the hob are displayed
on the main screen.
Note: Connection can only be established when both
appliances are connected to your home network and
the connection process has been initiated for both of
them. If the time allowed for connecting has already
expired for one of the two appliances, initiate the
connection process again.
Disconnecting from the network
Di s connec t i ng from the net wor k
You can reset the connections you have saved for your
home network and extractor hood at any time.
1. Touch the e symbol in the docking menu to open
the basic settings.
2. Touch the "Hood control" setting.
3. Touch "Disconnect".
The connection has been restored.
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 42
You can select other settings using the control panel.
Setting the fan
Activation
1. Touch the I symbol in the settings area.
The preset fan setting is shown on the display.
2. Select the fan setting you require.
Touch int 1 or int 2 to select one of the intensive
modes.
The fan has been activated.
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
The fan has been deactivated.
Setting automatic mode
Activation
1. Touch the I symbol in the settings area.
2. Select !.
Automatic mode is activated.
The fan starts automatically when steam is produced.
Deactivating
1. Touch the I symbol in the settings area.
2. Select fan setting 0.
Automatic mode is deactivated.
Setting the hood lighting
The hood light can be switched on and off using the
control panel on the hob.
Touch the = symbol on the main screen.
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens EZ807KZY1E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens EZ807KZY1E

Siemens EZ807KZY1E Bedienungsanleitung - Deutsch - 52 seiten

Siemens EZ807KZY1E Bedienungsanleitung - Holländisch - 52 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info