Bedienungsanleitung Siemens Gigaset 2060isdn (Seite 84 von 112) (Englisch)

46716

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Multicell system

I_KAP05.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

General remarks

When the Gigaset 2060isdn is incorporated in a multicell system you can use your mobile unit

at any of several base stations. By positioning the Gigaset 2060isdn base stations strategically

you can extend the area in which you can use your mobile unit.

● You can register and use your mobile unit at a maximum of six Gigaset 2060isdn base sta-

tions.

● You can register a maximum of 8 mobile units at each Gigaset 2060isdn base station.

● You can use a mobile unit under the same external number (MSN) at each base station.

● Your mobile unit can be reached under the same external number (MSN) at any base station.

● You can change from base station to base station while a call is in progress (external call).

Organization of base stations and mobile units

It is advisable to organize the multicell system as follows:

● Number the base stations consecutively, i.e. assign the numbers 1 to 6.

● Determine the internal numbers for the mobile units to be operated at a base station (see

“Registering comfort mobile units at multiple base stations”, ➔ page 84).

● Register each mobile unit at base station No. 2 under the same number as at base station

No. 1.

● Register the mobile units at base stations Nos. 3 to 6, if applicable, again using the same

numbers in each case.

● Activate display of base-station numbers in each mobile unit (not necessary in the case of

comfort mobile units).

If your multicell system is behind a PBX with various lines:

● Set collective call in the PBX so that a mobile unit can be reached at the various lines.

Notes on use

● At any given time, the mobile unit is in radio connection with the base station shown on the

display. Incoming and outgoing calls can be conducted only via this base station (even if the

radio footprints of neighboring base stations overlap).

Internal calls care possible only within the radio range of the current base station. You cannot

conduct an internal call with a user in radio connection with another base station in the mul-

ticell system.

● When the mobile unit moves into the radio footprint of another base station the radio con-

nect to the original base station is broken and a connection to the new base station is set

up automatically (see “Setting automatic base station selection”, ➔ page 86).

You can deactivate automatic base station selection and manually define the base station with

which the mobile unit maintains contact (see the User Guide for your mobile unit). This is impor-

tant in the areas in which two or more radio cells overlap, because it enables you to define the

base station from which your mobile unit will receive calls.

Possible combinations

You can combine base stations in a variety of ways, choosing the arrangement best suited to

the number of base stations and the desired range.

Bear in mind that if you have a point-to-multipoint access, the maximum permissible distance

between the first and last base stations is 150 meters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 2060isdn Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 2060isdn

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info