Bedienungsanleitung Siemens Gigaset 2060isdn (Seite 99 von 112) (Englisch)

46716

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Frequently asked questions

I_KAP07.FM5

Gigaset 2060isdn, Inland:

8.12.98

A30853-X210-B101-1-19

● Once the voice-call connection has been set up the subsequent characters are sent via the

D channel unless temporary DTMF dialing is activated, in which case the digits are sent as

DTMF characters in the B channel. This switchover is required for accessing external devices

such as answering machines, etc.

14. Gigaset 2060isdn behind a PBX

What are the important points with regard to operating a Gigaset 2060isdn on the S

bus of a

private branch exchange?

● Behind a PBX, the Gigaset 2060isdn can access only the features supported by the PBX. In

contrast to the network provider, PBXs must sometimes interrupt the D channel (signaling

channel) so that features can be implemented by the PBX itself. The Gigaset 2060isdn trans-

mits only the protocol elements defined in the Euro-ISDN set, in other words it does not

transmit PBX-specific signaling in the D channel.

● Example - conference feature: initiation of a conference is always interpreted as an internal

conference by the PBX, whereas the Gigaset 2060isdn acts as if it were connected to a cir-

cuit provided by the network provider.

● Example - call forwarding: in the point-to-point mode PBXs usually implement call forwarding

themselves with a second B channel. These PBXs usually have multiple ISDN basic access-

es at their disposal. This arrangement is practical because call forwarding in the exchange

always applies to the entire access, irrespective of the number of B channels affected.

Call forwarding with the Gigaset 2060isdn behind PBXs works only when the PBX interprets

the protocol correctly.

15. Roaming

Roaming means searching for a user across all base stations of a multicell system. If a caller dials

the multiple subscriber number (MSN) of the mobile unit, all base stations are automatically

searched for the user in question. Only the base station at which the mobile unit is currently reg-

istered switches the connection.

The Gigaset 2060isdn supports roaming.

16. Handover

Handover is the automatic/semi-automatic transfer of existing external calls from one base sta-

tion to the next. This function ensures that mobile users can move freely throughout the entire

radio-coverage area of a multicell system, using their mobile units as they go.

The Gigaset 2060isdn supports handover as follows: If multicell operation is configured a range

warning tone sounds automatically as the user approaches the limit of a radio cell. The menu

offers the “CHANGE” function. The user has to confirm this function and the call is parked until

the mobile unit has registered with the new base station. The call is then handed over automat-

ically to the new station.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 2060isdn Seite 99

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 2060isdn

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info