Bedienungsanleitung Siemens Gigaset 5030 (Seite 3 von 34) (Englisch)

504623

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

gase

5030

eng-

A30350

M207

A801

5819

5030

_en.

Main menu (first menu level)

To open the main menu:

F Press the menu key.

To access a function in the main menu:

A / C B

Use the Down/Up key to scroll to the function

and press the OK key.

Submenus

To access a function in the submenu:

A / C B

Use the Down/Up key to scroll to the function

and press the OK key.

(If necessary, you can access the next level of

the submenu in the same way.)

The function to be set follows the last selection of a

submenu. A triangle g on the left displays the current

setting or position in the menu.

After pressing the OK key

B, you can make final edits to

the function.

Return (without saving) to exit the menu

While you are navigating through the menu or if you make

settings without having confirmed them with the OK key,

you can go back one step at a time without changing any

settings.

;...; Press the Last number redial key until you

reach the desired menu level or you exit the

menu.

Step-by-step instructions for navigating the menus

Individual steps that you must carry out to navigate the

menu appear in abbreviated form in the user guide, e.g.:

F ¢ Acoustic ¢ SPK Volume

In each case, the arrow ¢ means:

Scroll to the function with the Down/Up key

A / C, then

press the OK key

Finally, press

B again to select the function.

Detailed explanation of the above example:

F Press the menu key.

A Scroll to Acoustic with the Down key.

B Press the OK key.

A Scroll to SPK Volume with the Down key.

B Press the OK key.

If another submenu follows, continue using

A and B

in the same way until the desired function is called.

Making calls

Dialling a number

co Lift handset, dial number.

or ...

o Dial a phone number. If you enter an incorrect

number, press

> to delete it and proceed as

normal.

B/L Press the OK key or L.

After 2 seconds the number is dialled. Lift the

handset if you want to hold the conversation

via the handset.

The

; key can be used to insert pauses when dialling,

starting from the 2nd digit. By pressing

=> you can add

R-key functions to the number.

The approximate length of the call is shown on the display

in minutes and seconds at the end of a call.

Activating/deactivating handsfree talking

With this telephone you can also make calls (handsfree

mode) or settings without lifting the handset if the adapter

is connected. The best distance from the microhone for

speaking is about 50 cm.

◆ Activating during a call via the handset

L + a With the Loudspeaker key pressed replace the

handset.

◆ Activating before dialling the number

L Before dialling: hold down the Loudspeaker

key until you can hear the dialling tone.

Deactivating handsfree talking

c Lift the handset during the call.

Last number redial

The last 5 numbers dialled (up to 32 digits) are saved

automatically. You can retrieve these numbers from the

redial list and dial them again:

Redialling the last number dialled

c; Lift the handset and press the last number

redial key. The last dialled phone number is

dialled immediately.

> Phonebook

Ó Message

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 5030 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 5030

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info