Bedienungsanleitung Siemens Gigaset 5030 (Seite 13 von 34) (Englisch)

504623

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

gase

5030

eng-

A30350

M207

A801

5819

5030

_en.

Adding the number of the message sender to the directory

You are reading an SMS (page 12).

B Press the OK key.

AB Select Save Address. Press the OK key.

Continue, see page 4.

Setting the validity period

Sent SMS are stored temporarily in the SMS centre. If it is not

possible to deliver an SMS, e.g. because the receiver's tele-

phone is not switched on, the SMS is stored in the centre for

the validity period and repeated attempts to deliver are

made. If the SMS cannot be delivered within the validity

period, it is deleted at the SMS centre and is not delivered.

F ¢ SMS/CLIP Setup ¢ Valid Period

AB Select validity period (1, 12, 24 or 72 hrs.).

Press the OK key.

Activating/deactivating automatic reply

If no CLIP is transmitted to your line, you can adjust the set-

ting so that the attempted delivery of an SMS will be

answered automatically by the SMS centre after a specified

number of ringtones (default setting: Disable).

F ¢ SMS/CLIP Setup ¢ Auto Answer

AB Select the ringtone frequency

(Disable, 2, 3, 4, 5, 8 or 9).

Press the OK key.

SMS to a PABX

◆ You can only receive an SMS when the Calling Line

Identification is forwarded to the extension of the

PABX (CLIP). The CLIP evaluation of the number of the

SMS centre takes place in your telephone.

◆ Depending on your PABX, you may have to add the

access code (external line prefix) before the number of

the SMS centre. You can store the access code in your

telephone.

If in doubt, test your PABX e.g. by sending an SMS to

your own phone number, once with and once without

the access code.

◆ When you send text messages, your sender number may

be sent without your extension number. In this case, the

recipient cannot reply to you directly.

Sending and receiving SMS on ISDN PABXs is only possible

via the MSN number assigned to your telephone.

Activating/deactivating the SMS function

When you switch off you cannot send or receive any text

messages with your phone.

Settings which you have made for sending and receiving

text messages (the numbers of SMS centres) and any entries

in the incoming message and draft message lists will be

retained even after the function is deactivated.

F ¢ SMS/CLIP Setup ¢ SMS Service

A/C Activate: select Yes (default setting);

Deactivate: select No.

B Press the OK key.

Self-help with errors

The following table lists error situations and possible causes

and provides notes on troubleshooting.

You cannot send messages.

1. You have not requested the CLIP service (Calling Line

Identification Presentation).

Ask your service provider to enable this service.

2. Text message transmission has been interrupted (e.g. by a call).

Re-send the text message.

3. The feature is not supported by the network provider.

4. No number or an invalid number is entered for the SMS centre

activated as the send centre.

Enter phone number (page 10).

You receive a message whose text is incomplete.

1. Your phone memory is full.

Delete old messages (page 12).

2. The service provider has not yet sent the rest of the message.

You have stopped receiving messages.

Call forwarding is activated with CFU or call forwarding CFU is

activated for the T-Net box.

Change your call forwarding.

The message is played back.

1. The "display call number" service is not activated.

Have your service provider enable this service (there is a charge

for this).

2. Mobile phone operator and network SMS service provider have

not agreed on a cooperation.

Obtain information from your network SMS service provider.

3. The end device is stored in your SMS provider's database as not

having fixed network SMS functionality, i.e. you are no longer

registered there. Register the terminal (again) for SMS recep-

tion.

Messages are only received during the day.

1. The terminal is stored in your SMS provider's database as

not having fixed network SMS capability, i.e. you are no longer

registered there.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset 5030 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset 5030

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info