Bedienungsanleitung Siemens gigaset a160 (Seite 4 von 12) (Englisch)

298692

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Athen / Irland / A31008-M1801-V101-2-7619 / Athen_Kombi_neu.fm / 17.09.2008

Making calls

Making external calls and ending a call

External calls are calls using the public telephone

network.

(Enter the phone number) ¢c.

The number is dialled. (Or you can first press and

hold

c [dial tone] and then enter the number.)

During the call you can adjust the earpiece volume

using

End the call/cancel dialling:

Press the end call key

You can automatically insert a network provider

dialling code before any phone number

(see "Preselection" Menu tree, page 11).

Answering a call

An incoming call is indicated by ringing, by a flash-

ing handsfree key

d (Gigaset A260/A265) and a

display on the screen.

You can answer the call by:

◆ Pressing the talk key c.

◆ Press the handsfree key d (Gigaset A260/

A265).

When Auto Answer is activated (see Menu tree,

page 11), simply remove the handset from the

base station/charging cradle.

Displaying the caller's phone number

When you get a call, the caller's phone number will

be displayed on your handset; or the caller's name

will be displayed if it is stored in the directory.

Requirements:

1 You have asked your network provider for the

caller's phone number (CLIP) to be displayed on

your handset screen.

2 The caller has asked the network provider for

his phone number to be identified (CLI).

appears in the display if you have not

requested Calling Line Identification, Withheld

appears if the caller has withheld CLI, and Unavail-

able if CLI has not been requested by the caller.

Handsfree talking

(only Gigaset A260/A265)

Once you have entered the phone number you can

immediately call in handsfree mode by pressing

(the

d key lights up continuously). During a call

and when playing back the answering machine

(if available) you can switch between earpiece and

handsfree mode by pressing

d. Set the handsfree

volume with

Operating the handset

Activating/deactivating the handset

Press and hold the end call key a.

If you place a deactivated handset in the base

station or charging cradle, it will automatically

activate.

Using the directory and lists

Directory

To open the directory: press h (Gigaset A160/

A165) or

v (Gigaset A260/A265).

You can save up to 40 phone numbers

(max. 32 digits) with corresponding names

(max. 14 characters).

Saving the first number in the directory

or v ¢ New Entry? ¢ OK

Saving a number in the directory

or v ¢ MENU ¢ New Entry ¢ OK

Selecting a directory entry

Open the directory with h or v. You have the

following options:

◆ Use u to scroll to the entry until the required

name is selected.

◆ Enter the first character of the name or scroll to

the entry with

u, if required.

Note:

You can assign a number from the directory to a

key for speed dial (page 5).

Enter number and press OK.

Enter name and press OK.

Enter number and press OK.

Enter name and press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens gigaset a160 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens gigaset a160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info