Bedienungsanleitung Siemens gigaset a160 (Seite 7 von 12) (Englisch)

298692

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Athen / Irland / A31008-M1801-V101-2-7619 / Athen_Kombi_neu.fm / 17.09.2008

Setting call acceptance

You can set when you want the answering

machine to accept a call.

MENU ¢ Voice Mail ¢ OK ¢ Ring Delay

¢ OK ¢ Select Immediately / 10 sec / 20 sec /

30 sec / Auto ¢ OK (‰ =on)

Setting the recording time

See Menu tree, page 11.

Assigning key 1 for speed dial to the

answering machine (network mailbox)

Simply press and hold key 1 on the handset and

you will be connected directly to the answering

machine (network mailbox).

See Menu tree, page 11.

Registering corresponding

handsets

You can register up to four handsets on your base

station.

For automatic registration of handsets to

Gigaset A160/A260/A165/A265, see page 3.

Manual registration of handsets to A160/A260/

A165/A265

1. On the handset: MENU ¢ Settings ¢ OK

¢ Handset ¢ OK ¢ Register HS

¢ Enter the system PIN of the base station

(default is 0000)

¢ OK.

Registering flashes in the display.

2. On the base station: within 60 sec. of entering

the system PIN, press and hold the registration/

paging key

÷ or ù (page 1) (min. 1 sec.).

Registration can take up to 5 minutes.

Locating a handset ("Paging")

You can locate your handset using the base station.

◆ Briefly press the registration/paging key ÷ or

ù on the base station (page 1).

◆ All handsets will ring at the same time ("pag-

ing"), even if the ringtones are switched off.

End paging: briefly press the register/paging key

÷ or ù on the base station (page 1) or the talk

key

c on a handset.

Using several handsets

Making internal calls

Internal calls are no-cost calls to other handsets

that are registered to the same base.

Press the INT display key. All handsets are called.

When an internal participant answers you can

speak to them. To end the call, press

Internal consultation call/connecting

acall

You are in conversation with an external partici-

pant. Press the INT display key. All handsets are

called. The external participant hears the hold

music.

◆ Before the internal participant has answered,

press the end call key

a; the call is forwarded

to the participant who answers the call.

◆ After the internal participant has answered,

you can talk to him. Press the end call key

the call is forwarded, or press the

” display key;

you are reconnected to the external participant.

Listening in to an external call

You are conducting an external call. An internal

caller can listen in on this call and take part in the

conversation. All the participants are made aware

of the 'listening in' by a beep.

Precondition: The Listening in function must be

activated.

Activating/deactivating internal listening in

MENU ¢ Settings ¢ OK ¢ Base ¢ OK

¢ Listening in ¢ OK (‰ =on)

Internal listening in

You want to listen in to an existing external call.

Press and hold the talk key

c. You are linked into

the call. All participants hear a beep.

To end: press the end call key

a. All participants

hear a beep.

If the first internal participant presses the end call

key

a, the handset that has 'listened in' remains

connected to the external caller.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens gigaset a160 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens gigaset a160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info