Bedienungsanleitung Siemens Gigaset AL13H (Seite 3 von 8) (Englisch)

515481

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

AL13H (AL14H) / SEA / A31008-M2050-Y701-1-7619 / AL14H_EN_SEA.fm / 10.09.2008

On the handset

MENU ¢ Settings ¢ OK ¢ Handset ¢ OK

¢ Register HS ¢ Enter the base station system

PIN (default setting: 0000)

¢ OK.

Registering flashes in the display.

Registration takes approx. 1 minute.

Charging the battery pack

Plug the mains unit for the charging cradle into the

socket and place the handset in the charging cradle

with the display facing forward.

To charge the battery pack, leave the handset in

he base station for approx. 7 hours. The battery

pack is now fully charged. The charge status of the

battery pack is only correctly displayed after unin-

terrupted charging/discharging. Therefore you

ould not interrupt the charging process.

Charging is electronically controlled to prevent

vercharging. The battery pack heats up during

charging. This is normal and not dangerous. After

a while its charge capacity will decrease for techni-

cal reasons.

You must set the date and time to ensure that the

times of

calls are logged correctly (see Menu tree

page 7).

Once the phone is registered

and the time set, the

idle display looks as shown on page 1.

If you have any questions about using your phone,

please r

ead the tips on troubleshooting ("Ques-

tions and answers", page 6) or contact our cus-

tomer service department (page 6).

Activating/deactivating the handset

Press and hold the end call key a.

If you place a deactivated handset into the charg-

ing cradle, it will automatically activate itself.

Making calls

Making external calls and ending calls

External calls are calls using the public telephone

network.

(Enter the phone number) ¢c.

The number is dialled. (Or you can first pr

ess and

hold

c [dial tone] and then enter the number.)

During the call you can adjust the earpiece volume

using

End the call/cancel dialling:

Press the end call key

You can automatically insert a network provider

diall

ing code before any phone number (see

"Preselection" Menu tree, page 7).

Accepting a call

The handset indicates an incoming call by ringing

and by a display on the screen.

Press the talk key

c to accept the call.

When Aut

o Answer is activated (see Menu tree,

page 7), simply remove the handset from the base

station/charging cradle.

Using the directory and lists

Directory

To open the directory: press h.

You can save up to 40 phone numbers

(max. 32 digits) with corresponding names

(max. 14 characters).

Saving the first number in the directory

¢ New Entry? ¢ OK

Storing a number in the directory

¢ MENU ¢ New Entry ¢ OK

Please note:

You can also aut

omatically register the Gigaset

AL13H handset to the Gigaset AL130/AL135 base

ation. Precondition: The handset is not registe-

red to a base station. Place the handset in the

harging cradle of the base station with its dis-

play facing forward.

You will hear a confirmation

tone. Leave the handset in the base station until it

is registered.

Please note:

You can assign a number from the directory to a

ey for quick dialling (page 4).

Enter number and press OK.

Enter name and press OK.

Enter number and press OK.

Enter name and press OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset AL13H Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info