Bedienungsanleitung Siemens Gigaset AL140 quattro (Seite 3 von 12) (Englisch)

580074

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

L1a / IM-NORD En / A31008-M2001-R201-1-9W19 / AL140_IM-NORD_EN.fm / 09.09.2008

Opening the battery cover

Press down on the battery cover below its upper

end

and slide the cover down.

Step 3: Registering the handset to

the base station and charging the

battery pack

Precondition: The handset must not already be

registered to a base station.

The handset is aut

omatically registered to the

Gigaset A140/AL145 base station. Place the hand-

set in the charging cradle of the base station with

s display facing forward. You will hear a confir-

mation tone. Leave the handset in the base station

ntil it is registered.

Automatic registration can take up to 5 minutes.

hile this is happening, Registering flashes in the

screen. The handset is assigned the lowest unas-

signed internal number (1–4). If several handsets

re registered on the base station, the internal

number is shown in the top left of the display after

registration, e.g. 2. If the internal numbers 1 to 4

ave already been assigned (four handsets have

already been registered), handset number four is

deregistered and overwritten.

Charging the battery pack

To charge the battery pack, leave the handset in

the base station for approx. 7 hours. The battery

pack is now fully charged. The charge status of the

battery pack is only correctly displayed after unin-

terrupted charging/discharging. Therefore you

ould not interrupt the charging process.

Charging is electronically controlled to prevent

vercharging. The battery pack heats up during

charging. This is normal and not dangerous. After

a time its charge capacity will decrease for techni-

cal reasons.

You must set the date and time to ensure that the

times of

calls are logged correctly (see Menu tree

page 10).

Once the phone is registered

and the time set, the

idle display looks as shown on page 1.

If you have any questions about using your phone,

please r

ead the tips on troubleshooting ("Ques-

tions and answers", page 9) or contact our cus-

tomer service department (page 12).

Making calls

Making external calls and ending calls

External calls are calls using the public telephone

network.

(Enter the phone number) ¢c.

The number is dialled. (Or you can first pr

ess and

hold

c [dial tone] and then enter the number.)

During the call you can adjust the earpiece volume

using

End the call/cancel dialling:

Press the end call key

You can automatically insert a network provider

diall

ing code before any phone number (see

"Preselection" Menu tree, page 10).

Accepting a call

The handset indicates an incoming call by ringing

and by a display on the screen.

Press the talk key

c to answer the call.

When Aut

o Answer is activated (see Menu tree,

page 10), simply remove the handset from the

base station/charging cradle.

Calling Line Identification

When you get a call, the caller's number will be dis-

played on your handset; the caller's name will be

displa

yed if it is stored in the directory.

Preconditions:

1 You have asked your network provider for the

ller's number (CLIP)to be displayed on your

ndset screen.

2 The caller has asked the network provider for

s number to be identified (CLI).

appears in the display if you have not

requested Calling Line Identification, Withheld

appears if the caller has withheld CLI, and Unavail-

able appears

if CLI has not been requested.

Operating the handset

Activating/deactivating the handset

Press and hold the end call key a.

If you place a deactivated handset in the base sta-

tion or charging cradle, it will automatically acti-

vate.

Please note:

If you have acquired additional handsets in this

igaset family or other Gigaset handsets, each

handset must be registered to your base station in

order for them to work properly, see also page 6!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset AL140 quattro Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset AL140 quattro

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info