Bedienungsanleitung Siemens Gigaset HC450 (Seite 14 von 30) (Englisch)

63676

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

Setting up the Gigaset HC450 door intercom system

Gigaset HC450 / en / A31008-M1799-R101-2-7619 / TFE_Setting.fm / 08.10.2008

Version 4, 16.09.2005

Setting up the

Gigaset HC450 door

intercom system

Once you have installed your HC450 door

intercom system, you can set up the door

intercom at your convenience using a

compatible handset. Before you can do

this, however, you must register the door

intercom system with the base station.

Registering with the base station

Make sure that the control unit is con-

nected to a power supply. If the LED on the

HC450 control unit is flashing, it means

that it is not yet connected with the base

station.

u Set the 4-digit system PIN of your base

station to "0000" if necessary (refer to

the manual for your telephone).

u Press the registration/paging key on the

base station for approx. 3 seconds. The

registration/paging key is located on

the right beside the charging cradle.

u Go over to the control unit and press

the button on the control unit with a

thin object such as a paper clip within

20 seconds (see illustration on p. 11).

The LED on the control unit will light up

continuously once it has been regis-

tered (the LED will return to flashing

when a call is underway between the

door intercom and base station). If reg-

istration does not take place despite a

number of attempts, reduce the dis-

tance between the base station and

control unit (the base station can be

disconnected from the telephone net-

work to do this) and/or briefly discon-

nect the control unit from the power

supply before commencing registra-

tion.

u Following successful registration,

"Intercom" will appear in the list of inter-

nal users. This preset name can be

changed via the handsets (refer to the

user guide for the handset).

Setting functions

Starting programming

Call up the menu for the door intercom

settings. This initial programming step is

always the same for all functions to be set.

u Initiate an internal call and

select the internal user

"Intercom".

c Press the talk key.

¨ Press the display key.

~ Enter the 4-digit system PIN of

the door intercom if the PIN

has been changed from the

delivery version (0000) and

press

§OK§.

You are now in the menu in which you can

make settings for the door intercom.

Changing the display language

You can view the display texts in different

languages. The languages available

include English, German, Italian, Dutch

and French.

Call up the menu for the settings

(see p. 13):

Note:

Change the system PIN of the base station

once more (refer to the manual for your tele-

phone). This ensures, among other things,

that only designated handsets can be regis-

tered with the base station.

Note:

The menu for changing the display language is

called up automatically during startup

(see p. 13).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset HC450 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset HC450

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info