490178
31
Zoom out
Zoom in
Vorherige Seite
1/83
Nächste Seite
29
Gigaset S820-S820A / LUG - AU-NZ en / A31008-M2404-C401-1-7619 / settings.fm / 11/29/12
Template CES 131x195 1col, Version 1, 12.03.2012
ECO DECT
ECO DECT
ECO DECT indicates low energy consumption and reduced transmission power.
Reduced transmission power (radiation)
In normal operation mode (factory setting):
On delivery, the device is set to maximum range. This guarantees optimised wireless manage-
ment. The handset does not emit a signal in idle status (no r
adiation). Only the base ensures con-
tact with the handset is maintained through low-str
ength wireless signals. During a call the
strength of the wireless signal is adapted automatically to the distance between the handset
and base. The smaller the distance between the handset and base, the lower the transmission
power.
You can further reduce the transmission power as follows:
1) Reducing the range to decrease transmission power by up to 80%
Many apartments, business premises, offices, etc., do not need the maximum range. If you deac-
tivate the Maximum R
ange setting, transmission power during a call is reduced to 80% at half
the range.
Menu key v
¤Settings menu page ¤ÊSystem ¤ECO DECT ¤Maximum Range on/off
Display icon for reduced range
¢ page 58.
2) Deactivating the DECT wireless module in idle status (Eco mode+)
You can deactivate the wireless signal output from the base completely in idle status via the No
Radiation setting.
Menu key v
¤Settings menu page ¤ÊSystem ¤ECO DECT ¤No Radiation on/off
When the wireless module is deactivated the idle display shows th
e icon instead of the sig-
nal strength icon.
Please note
u To benefit from Eco mode+, all registered handsets must support this function.
u The wireless connection is established automatically f
or incoming or outgoing calls only.
This causes a connection delay of approx. 2 seconds.
u Handsets need to "listen in" to the base, i.e.,
scan the surrounding area, on a regular basis
to enable them to establish a connection to the base quickly in the event of an incoming
call. This increases power consumption and therefore reduces the handset’s standby
time and talktime.
u When Eco m
ode+ is activated (no radiation) the handset does not display a range indi-
cator/range warning. You can check availability by call
ing a line: Press and hold the talk
key
c. You hear the dial tone.
u If a handset registered on a base in Eco m
ode+ does not support this feature, Eco mode+
is automatically deactivated (range indicator is activated on handsets and the switch
turns to Of
f). As soon as the incompatible handset is de-registered again, Eco mode+ is
reactivated automatically.
¹
Ð
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

siemens-gigaset-s820a

Suche zurücksetzen

  • Auf dem Mobilteil wird keine Anrufliste mehr angezeigt.
    Ist dies in den Einstellungen zu korrigieren? Eingereicht am 3-2-2021 16:22

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens Gigaset S820A wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens Gigaset S820A

Siemens Gigaset S820A Bedienungsanleitung - Deutsch - 87 seiten

Siemens Gigaset S820A Bedienungsanleitung - Deutsch - 1 seiten

Siemens Gigaset S820A Bedienungsanleitung - Holländisch - 91 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info