Bedienungsanleitung Siemens gigaset sl400h (Seite 28 von 50) (Englisch)

301498

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Using a handset as a room monitor (Babyphone)

Gigaset SL400H / IM1 EN (IRL_UK) / A31008-M2152-R101-2-4N19 / registr_sett.fm / 01.02.2011

Version 4,1, 21.11.2007

The wake-up call sounds for 60 seconds. If

no key is pressed, the wake-up call is

repeated twice at five minute intervals and

then switched off.

During a call, the wake-up call is only sig-

nalled by a short tone.

Deactivating the wake-up call/

repeating after a pause (snooze

mode)

Prerequisite: A wake-up call is sounding.

§OFF§ Press the display key. The wake-

up call is deactivated.

§Snooze§ Press the display key or any key.

° is shown in the display. The

wake-up call is deactivated and

then repeated after 5 minutes.

After the second repetition, the

wake-up call is deactivated

completely.

Using a handset as a

room monitor

(Babyphone)

If the room monitor is activated, a previously

saved destination number is called as soon

as a set noise level is reached. You can save

an internal or external number in your hand-

set as the destination number. All of the

handset keys are deactivated, with the

exception of the display keys.

The room monitor call to an external

number is terminated after approximately

90 seconds. The room monitor call to an

internal number (handset) stops after

approx. 3 minutes (depending on the base).

When the room monitor is activated, all keys

are locked except the end call key. The hand-

set's speaker can be switched on or off (Two

Way Talk = On or Off). If Two Way Talk is

switched on, you can answer the room

monitor call.

Activating the room monitor and

entering the destination number

v ¢ É ¢ Room Monitor

¤ You can enter data in the following fields:

Activation:

Select On to activate.

Alarm to:

Select Internal or External.

External number: Select the number

from the directory (press display key

ö)

or enter it manually.

Internal number: Select display key

§Change§ ¢ Select handset or Call All to

call all registered handsets

¢ §OK§.

In idle status, the destination number or

the internal destination number is dis-

played.

Two Way Talk:

Switch the handset's speaker on or off

(select On or Off).

Sensitivity:

Select noise level sensitivity (Low or

High).

¤ Press §Save§ to save the settings.

Warning!

u Always check the operation of the

room monitor before use. For exam-

ple, test its sensitivity. Check the

connection if you are diverting the

room monitor to an external

number.

u When the function is switched on, the

handset's operating time is considera-

bly reduced. If necessary, place the

handset in the charger. This ensures

that the battery does not run down.

u Ideally the handset should be posi-

tioned 1 to 2 metres away from the

baby. The microphone must be

directed towards the baby.

u The connection to which the room

monitor is diverted must not be

blocked by an activated answering

machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens gigaset sl400h Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens gigaset sl400h

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info