Bedienungsanleitung Siemens gigaset sl400h (Seite 38 von 50) (Englisch)

301498

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

Gigaset SL400H / IM1 EN (IRL_UK) / A31008-M2152-R101-2-4N19 / appendix.fm / 01.02.2011

Version 4,1, 21.11.2007

Questions and answers

If you have any questions about the use of

your phone, you can contact us 24/7 at

www.gigaset.com/customercare

The table below contains a list of common

problems and possible solutions.

Authorisation

This device is intended for use within the

European Economic Area and Switzerland. If

used in other countries, it must first be

approved nationally in the country in ques-

tion.

Country-specific requirements have been

taken into consideration.

We, Gigaset Communications GmbH,

declare that this device meets the essential

requirements and other relevant regulations

laid down in Directive 1999/5/EC.

A copy of the 1999/5/EC Declaration of Con-

formity is available at this Internet address:

www.gigaset.com/docs

Registration or connection problems with a

Bluetooth headset.

¥ Reset the Bluetooth headset (see the user

guide for your headset).

¥ Delete registration data from the handset

when deregistering the device (

¢page 28).

¥ Repeat the registration process (¢page 27).

The display is blank.

1. The handset is not switched on.

¥ Press and hold the end call key a.

2. The battery is empty.

¥ Charge the battery or replace it (¢page 9).

Not all menu items are displayed.

The menu view is simplified.

¥ Activate complete menu view (expert

mode

•

) (¢page 15).

"No Base" flashes on the display.

1. The handset is outside the range of the base.

¥ Move the handset closer to the base.

2. The base's range is reduced because Eco

Mode is activated.

¥ Deactivate Eco Mode (¢ page 24) or

reduce the distance between the handset

and the base.

3. The base is not switched on.

¥ Check the base power adapter.

"Please register handset" flashes on the dis-

play.

Handset has not been registered with the base or

has been deregistered.

¥ Register the handset (¢page 11).

Handset does not ring.

1. The ringtone is deactivated.

¥ Activate the ringtone (¢page 32).

2. Call divert set for "All Calls".

¥ Deactivate call divert.

3. The phone only rings if the phone number has

been transferred.

¥ Activate the ringtone for unknown calls

(

¢page 32).

The other party cannot hear you.

You have pressed the mute button h. The

handset is "muted".

¥ Reactivate the microphone (¢page 18).

You hear an error tone when keying an input.

Action has failed/invalid input.

¥ Repeat the process.

Watch the display and refer to the user guide

if necessary.

Exclusion of liability

Some displays may contain pixels (pic-

ture elements), which remain activated

or deactivated. As a pixel is made up of

three sub-pixels (red, green, blue), it is

possible that pixel colours may vary.

This is completely normal and does not

indicate an error.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens gigaset sl400h Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens gigaset sl400h

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info