Bedienungsanleitung Siemens Gigaset SL785 (Seite 82 von 97) (Englisch)

61666

Zoom out

Zoom in

Vorherige Seite

1/97

Nächste Seite

Additional functions via the PC interface

Gigaset SL785 / GBR / A31008-M2009-L101-2-7619 / appendix.fm / 25.03.2009

Version 4, 16.09.2005

Additional functions via the

PC interface

You can connect your handset to your

computer via Bluetooth (

¢ page 63) or

via the supplied USB data cable. If you

want to use the Bluetooth connection,

your computer must be equipped with a

suitable dongle. To transfer data via the

USB port, you must install the driver soft-

ware from the supplied CD before con-

necting the USB data cable (

¢ page 18).

To enable your handset to communicate

with the PC the "Gigaset QuickSync"

program must be installed on your PC

(free to download at www.gigaset.com/

gigasetsl780).

Transferring data

You can

u synchronise your handset directory

with Outlook,

u download CLIP pictures (.bmp) from

the computer to the handset,

u download pictures (.bmp) as a screen-

saver from the computer to the handset

u download sounds (ring tones) from the

computer to the handset.

During the transfer of data between hand-

set and PC, you will see Data transfer in

progress on the display. During this time

the keypad is disabled, and incoming calls

will be ignored.

Completing a firmware update

¤ Connect your phone to your PC using

the USB data cable supplied

(

¢ page 18).

¤ Start the "Gigaset QuickSync" program

on your PC.

¤ Establish a connection to your handset.

¤ Select [Settings] ¢ [Device proper-

ties] to open the [Device] tab

¤ Click on [Firmware update]

This launches the firmware update.

The update process can take up to 10 min-

utes (not including the download time).

Do not interrupt the process or remove

the USB data cable.

The data is initially loaded from the

update server on the Internet. The

amount of time this takes is dependent on

the speed of your Internet connection.

The display on your phone is switched off

and the message key f and the

speaker key d start flashing.

Once the update is complete, your phone

will automatically restart.

Procedure in case of an error

If the update procedure fails or your

phone does not work properly following

the update, repeat the update procedure

as follows:

¤ Close the "Gigaset QuickSync" pro-

gram on the PC.

¤ Remove the USB data cable from the

telephone.

¤ Remove the battery (¢ page 14).

¤ Replace the battery.

¤ Complete the firmware update as

described.

If the update procedure fails several times

or you can no longer connect to the PC,

proceed as follows:

¤ Close the "Gigaset QuickSync" pro-

gram on the PC.

¤ Remove the USB data cable from the

telephone.

Please note

u If the USB data cable is plugged in, a

Bluetooth connection cannot be

established.

u If the enclosed USB data cable is

plugged in during an existing Blue-

tooth connection, the Bluetooth

connection is cancelled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens Gigaset SL785 Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens Gigaset SL785

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info