Bedienungsanleitung Siemens HB331.0J (Seite 8 von 24) (Englisch)

633945

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

6.Use the + button to set a later end time.

The setting is adopted after a few seconds.

The display shows the end time until the oven starts

operating.

The cooking time has elapsed

A signal sounds. The oven switches off. Press the

0 button

twice and switch off the function selector.

Note: You can make changes as long as the symbol is

flashing. When the symbol lights up, the setting has been

adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected

particularly quickly.

Use rapid heating when temperatures above 100 °C are

selected.

To ensure an even cooking result, do not place your dish in the

cooking compartment until rapid heating is complete.

1.Set the function selector to I.

2.Use the temperature selector to set the temperature.

The oven will start heating after a few seconds. The indicator

light above the temperature selector lights up.

The rapid heating process is complete

The indicator light above the temperature selector goes out.

Place your dish in the oven and select the desired type of

heating.

Cancelling rapid heating

Turn the function selector to the off position. The oven switches

off.

Setting the clock

When the appliance is connected for the first time or after a

power cut, the

0 symbol and three zeros flash in the display.

Set the clock. The function selector must be switched off.

Setting procedure

1.Press the 0 Clock button.

12.00 appears in the display and the

0 symbol flashes.

2.Use the + or - button to change the clock.

After a few seconds, the time is saved. The

0 symbol goes

out.

Changing from summer to winter time, for example

Press the

0 Clock button twice and change the time using the

+ or - button.

Setting the timer

You can use the timer as a kitchen timer. It runs independently

of the oven. The timer has a special signal. This means that you

can tell whether the timer duration or the cooking time has

elapsed. You can also set the timer if the childproof lock is

active.

Setting procedure

1.Press the S Timer button.

The

S symbol flashes.

2.Use the - or + button to change the timer duration.

Default value for + button = 10 minutes

Default value for - button = 5 minutes

The timer starts after a few seconds. The

S symbol lights up in

the display. You will see the time counting down.

When the time has elapsed

A signal sounds. Press the

S Timer button. The timer goes out.

Changing the timer duration

Press the

S Timer button. Use the + or - button to change the

time.

Cancelling the setting

Press the

S Timer button. Press the - button until zero is shown

on the display.

The timer and cooking time count down at the same time

Both symbols light up. You can see the timer duration counting

down in the display.

To call up the

x remaining cooking time, y end time or 0

clock:

Press the

0 Clock button repeatedly until the relevant symbol

appears.

The value you are checking appears for several seconds on the

display.

PLQ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HB331.0J Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info