Bedienungsanleitung Siemens HB43MB520B (Seite 12 von 28) (Englisch)

650895

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Checking the time settings

If several time-setting options are set, the relevant symbols are

illuminated on the display. The time-setting options symbol is in

the foreground and preceded by the

N arrow.

To call up the

V timer, x cooking time, y end time or 0

clock, press the

0 button repeatedly until the N arrow is next

to the relevant symbol. The display shows the value for a few

seconds.

Clock

After connecting the appliance to the mains or after a power

cut, the

0 symbol and three zeros flash in the display. Set the

clock.

1. Press the 0 button.

The clock in the display shows 12:00. The time symbols light

up and the

N arrow is next to 0.

2. Use the @ or A button to set the clock.

After a few seconds, the time that has been set is adopted.

Changing the clock

No other time-setting option should have been set.

1. Press the 0 button four times.

The time symbols light up in the display and the

N arrow is

next to

2. Use the @ or A button to change the clock.

After a few seconds, the time that has been set is adopted.

Hiding the clock

You can hide the clock. For more information, please refer to

the section Changing the basic settings.

Childproof lock

To prevent children from switching on the oven accidentally, it

has a childproof lock.

The

Æ main oven does not respond to any settings. You can

still set the clock and the timer when the childproof lock is

activated.

If the heating type and temperature or grill setting are set, the

childproof lock interrupts the heater element.

Switching on the childproof lock

No cooking time or end time may be set.

Press and hold the

h button for approximately 4 seconds.

The

@ symbol appears in the display. The childproof lock is

activated.

Switching off the childproof lock

Press and hold the h button for approximately 4 seconds.

The

@ symbol in the display goes out. The childproof lock is

deactivated.

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

No other time-setting option should have been set.

1. Press and hold the 0 button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

2. Use the @ or A button to change the basic setting.

3. Confirm by pressing the 0 button.

The next basic setting appears in the display. You can scroll

through all levels with the

0 button and change the setting

with the

@ or A button.

4. To finish, press and hold the 0 button for approx. 4 seconds.

All basic settings are applied.

You may change the basic settings at any time.

Basic setting Selection 1 Selection 2 Selection 3

c1 Clock display always* only with

the

0 but-

ton

c2 Signal duration

upon completion of

a cooking time or

timer period

approx.

10 seconds

approx.

2 minutes*

approx.

5 minutes

c3 Waiting time until a

setting is applied

approx.

2 seconds

approx.

5 seconds*

approx.

10 seconds

* Factory setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HB43MB520B Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info