Bedienungsanleitung Siemens HB74AR521E (Seite 7 von 28) (Englisch)

644504

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Before using the oven for the first time

In this section, you can find out what you must do before using

your oven to prepare food for the first time. First read the

section on Safety information.

Setting the time

Once the oven has been connected, the 0 and ‹:‹‹ symbols

light up on the display panel. Set the clock to the right time.

1. Press the 0 sensor.

The display panel displays the time

‚ƒ.‹‹

2. Set the time with the @ or A sensors.

3. Confirm the time with the 0 sensor.

The programmed time is displayed after a few seconds.

Heating the oven

To remove the "new" smell, heat the oven empty with the door

closed. The most effective option is to heat the oven for one

hour with the top and bottom heating elements

% set at

240 ºC. Check that no packaging has been left inside the oven.

1. Select top and bottom heating % using the function control

knob.

2. Press the @ sensor until 240 ºC is displayed on the display

panel.

Turn the oven off after one hour. To do this, turn the function

control knob to zero.

Cleaning the accessories

Before using the accessories for the first time, clean them

thoroughly using a cloth, hot water and a little soap.

Programming the oven

There are different ways to programme the oven. Programming

the type of heating, temperature or grill power. The oven can be

programmed with the cooking time (duration) and the end time

for each dish. For more information, see the chapter Setting the

time functions.

Note: We recommend preheating the oven before inserting the

food in order to avoid condensation on the oven glass.

Type of heating and temperature

Example in the picture: top and bottom heat % at 190 °C.

1. Select the type of heating using the function control knob.

2. Set the temperature or required grill power using the @ or A

sensors.

The oven will begin to heat up.

Switching the oven off

Set the function control knob to the zero setting.

Changing the settings

The type of heating and the temperature or grill power may be

changed at any time.

Rapid heating

With the rapid heating setting, the oven reaches the

programmed temperature very quickly.

Rapid heating must be used for temperatures of more than

100 ºC.

To ensure uniform cooking, the food must not be put into the

oven until rapid heating has been completed.

1. Select rapid heating I using the function control knob.

2. Select the required temperature using the @ and A sensors.

The

s symbol lights up on the display panel. The oven will begin

to heat up.

End of rapid heating

A signal will sound, the

s symbol will go out. Place the food in

the oven and select the required function and temperature.

Cancelling rapid heating

Set the function control knob to the zero setting. The oven

switches off.

Note: With the rapid heating function you cannot programme

the cooking time duration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HB74AR521E Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens HB74AR521E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info