Bedienungsanleitung Siemens HB78G4580 (Seite 21 von 40) (Englisch)

526422

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

7. Put the cover back in place and screw it on.

8. Attach the oven door.

Do not use the oven again until the panels have been

correctly installed.

Troubleshooting

Malfunctions often have simple explanations. Refer to the table

before calling the after-sales service as you may be able to

remedy the fault yourself.

Malfunction table

If a dish does not turn out exactly as you wanted, refer to the

Tested for you in our cooking studio section, where you will

find plenty of cooking tips and tricks.

: Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be carried

out by one of our trained after-sales engineers.

Error messages with E

If an error message with E is shown in the display, press the

0 button. This cancels the error message. You may then have

to reset the time. If the error is shown again, call the after-sales

service.

You can take remedial action yourself if the following error

messages are displayed.

Replacing the bulb in the oven ceiling light

If the bulb in the oven light fails, it must be replaced. Heat-

resistant, 10 watt, 12 V halogen bulbs are available from the

after-sales service or specialist retailers. When handling the

halogen bulb, use a dry cloth. This will increase the service life

of the bulb. Only use these bulbs.

: Risk of electric shock!

Switch off the circuit breaker in the fuse box.

1. Place a tea towel in the oven when it is cold to prevent

damage.

2. Remove the glass cover. To do this, press the metal tabs to

the side with your thumb (Fig. A).

3. Pull out the bulb, do not turn it (Fig. B). Insert the new bulb,

making sure that the pins are in the correct position. Push the

bulb in firmly.

Problem Possible cause Note/remedy

The appliance does not work. Defective fuse Look in the fuse box and check that the circuit

breaker is in working order.

“Set clock” appears in the status bar. The

time is not the current time. “Select lan-

guage” appears in the settings area on

the right.

Power cut Turn the rotary selector to set the current time then

press the

0 button. The language set remains

unchanged following a power failure.

The oven door cannot be opened. “Set

clock” appears in the status bar. The time

displayed is not the current time. “Select

language” appears in the settings area on

the right. The

H symbol is displayed.

Power cut during self-cleaning. Turn the rotary selector to set the current time then

press the

0 button. The language set remains

unchanged following a power failure. Wait until the

cooking compartment has cooled down. The

symbol disappears. You can now open the oven

door.

The oven does not heat up or the type of

heating selected cannot be set.

Type of heating not recognised Set once again.

The oven does not heat up. “Demo” is dis-

played in the status bar.

The oven is in demo mode. Switch off the circuit breaker in the fuse box and

then switch back on after approx. 20 seconds. In

the next 2 minutes hold the

@ button down for

four seconds until the text "Demo" disappears.

“Automatic switch-off” appears in the sta-

tus bar.

Automatic switch-off has been

activated. The oven switches off.

Press any button. The text disappears. You can

make settings again.

Error message Possible cause Note/remedy

E011 A button was pressed for too long

or has jammed.

Press all buttons individually. Check that the but-

tons are clean. If the error message remains,

please contact the after-sales service.

E115 The temperature in the cooking

compartment is too high.

The oven door locks. Wait until the cooking com-

partment has cooled down. Clear the error mes-

sage with the

0 button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HB78G4580 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens HB78G4580

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info