11
3. Press the † button.
Operation starts. The heating bars of the temperature
indicator appear in the status bar.
4. Once the dish is ready, switch the oven off with the
‡ button
or select and apply a new operating mode.
Opening the oven door during cooking
Operation is suspended. When the door is closed again,
operation resumes.
Pausing operation
Press the
† button. The oven is paused, † flashes. Press
the
† button again, operation continues.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Cancelling operation
Press and hold the
† button until 3D hot air, 160 °C appears.
You can make new settings.
Calling up information
Press the
± button briefly. For any information, press the ±
button again briefly. Before the appliance is started, information
is displayed on the types of heating, shelf positions and
accessories. After the appliance is started, you can check the
heating temperature in the cooking compartment.
Setting the cooking time
See section Time-setting options, setting the cooking time.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Recommended settings
If you choose a dish from the recommended settings, the ideal
setting values are already specified. You can choose from
many different categories. You will find recommended settings
for a large number of dishes – from cake, bread, poultry, fish,
meat and game through to bakes and pre-prepared products.
You can change the temperature and cooking time. The type of
heating is fixed.
You can access the various dishes by navigating through
several selection levels. Try it out and see the range of dishes
for yourself.
Selecting a dish
1. Press the
‡ button.
: 3D hot air, 160 °C are suggested in the display.
2. Turn the rotary selector anticlockwise to
j Recommended
settings.
3. Move to the first food category with the
¿ button and select
the required category with the rotary selector.
Move to the next level with the
¿ button. Turn the rotary
selector to make the next selection. The setting for the
selected dish now appears.
4. Press the
† button.
Appliance operation begins. You can see the suggested x
cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. The status bar shows
x 0:00. You can cancel the signal early by pressing the 0
button.
Changing the temperature or grill setting
Turn the rotary selector to change the temperature or grill
setting.
Changing the cooking time
Press the
0 button and move to the cooking time with the ¿
button. Change the cooking time using the rotary selector.
Press the
0 button.
Calling up information
Press the
± button briefly. For any information, press the ±
button again briefly.
Setting a later end time
See the section entitled Time-setting options, Setting a later end
time.
Setting rapid heating
Rapid heating is not suitable for all types of heating.
Suitable types of heating
■ 3D hot air
■ Top/bottom heating
■ HydroBaking
■ Pizza setting
■ Intensive heat
Suitable temperatures
Rapid heating will not work if the temperature is set to less than
100 °C. If the temperature in the cooking compartment is only
slightly less than the temperature you have set, rapid heating is
not necessary. It will not switch on.
Setting rapid heating
Press the
c button to activate rapid heating. The c symbol
is displayed in the status bar. The temperature indicator bars
start filling in.
Rapid heating ends when all the bars are filled. You will hear a
short signal. The
c symbol goes out. Place your dish in the
cooking compartment.
Notes
■ Rapid heating is cancelled if you change the type of heating.
■ If a cooking time has been set, this runs independently of
rapid heating and counts down immediately when operation
is started.
■ You can use the ± button to check the current cooking
compartment temperature during rapid heating.
■ To ensure an even cooking result, do not place your dish in
the cooking compartment until rapid heating is complete.
Cancelling rapid heating
Press the
c button. The symbol goes out.
