Bedienungsanleitung Siemens HB933R51 (Seite 17 von 144) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

526445

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Setting the end of operating time

1. Press the y button.

The total of the current clock time and the operation duration

is shown in the display panel.

2. Press and hold the y button and use the + and - buttons to

change the end of the operating time.

The oven switches off and starts later automatically. The A

symbol and the current clock time appear in the display

panel.

The operating time duration has elapsed

A signal sounds and the

x symbol is shown with the current

clock time in the display panel.

The oven switches off.

To end the signal early, press one of the function buttons.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

: Risk of electric shock!

Penetrating moisture may cause an electric shock. Do not use

any high-pressure cleaners or steam cleaners.

: Risk of burns!

The appliance becomes very hot. Never touch the interior

surfaces of the cooking compartment or the heating elements.

Always allow the appliance to cool down. Keep children at a

safe distance.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

Do not use

■ harsh or abrasive cleaning agents

■ cleaning agents with high concentrations of alcohol

■ hard scouring pads and sponges

■ high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Catalytic cooking compartment panels

The catalytic cooking compartment panels are coated with self-

cleaning enamel.

The surfaces clean themselves while the oven is in operation.

Larger splashes will only be removed after the oven has been

used several times.

Self-cleaning surfaces

The side walls are covered with catalytic panelling. Never clean

these surfaces with oven cleaner. Slight discolouration of the

enamel does not affect automatic self-cleaning.

Removing the ceiling panel

For ease of cleaning, you can remove the ceiling panel.

Area Cleaning agents

Appliance exterior Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaners or

glass scrapers.

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Remove flecks of limescale,

grease, starch and albumin (e.g. egg

white) immediately. Corrosion can form

under such residues.

Special stainless steel cleaning prod-

ucts suitable for hot surfaces are availa-

ble from our after-sales service or from

specialist retailers. Apply a very thin layer

of the cleaning product with a soft cloth.

Aluminium and

plastic

Glass cleaner:

Clean with a soft cloth.

Enamel surfaces

(smooth surfaces)

To facilitate cleaning, you can switch on

the interior lighting and detach the appli-

ance door if necessary. Apply commer-

cially available washing-up liquid or a

vinegar solution with a soft, damp cloth

or chamois; dry with a soft cloth. Loosen

baked-on food residues with a damp

cloth and detergent. We recommend

using oven cleaning gel if the oven is

very dirty. This can be applied to the

affected area. Leave the cooking com-

partment open after cleaning to allow it

to dry.

Self-cleaning sur-

faces (rough sur-

faces)

Please see the notes in section: Self-

cleaning surfaces

Door panels Glass cleaner:

Clean with a soft cloth. Do not use a

glass scraper.

Glass cover for the

oven light bulb

Hot soapy water:

Clean with a dish cloth.

Seal

Do not remove.

Hot soapy water:

Clean with a dish cloth. Do not scour.

Shelves Hot soapy water:

Soak and clean with a dish cloth or

brush.

Accessories Hot soapy water:

Soak and clean with a dish cloth or

brush.

Area Cleaning agents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HB933R51 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info