Bedienungsanleitung Siemens HM678G4S1 (Seite 15 von 48) (Englisch)

790350

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Time-setting options en

10 Time-setting options

Your appliance has different time-setting options, with

which you can control its operation.

10.1 Overview of the time-setting options

You can set a cooking time and an operation end time

on the appliance. The timer runs independently of the

appliance during the operation.

Time-setting

option

Use

Timer ⁠ You can set the timer to run inde-

pendently of the appliance during op-

eration. It does not affect the appli-

ance.

Cooking time

⁠

If you set a cooking time, the appli-

ance will stop heating automatically

once this time has elapsed.

End time ⁠ Along with the cooking time (dura-

tion), you can set the time at which

you want cooking to end. The appli-

ance starts up automatically so that it

finishes cooking at the required time.

10.2 Setting the timer

The timer runs independently during the operation. The

timer can be set when the appliance is switched on or

off, up to 24 hours. The timer has its own audible sig-

nal so that you can tell whether it is the timer or a

cooking time that has elapsed.

1. Press ⁠.

aThe field for the timer opens.

2. Use the rotary selector to set the timer duration.

aThe timer starts automatically after a few seconds.

aThe ⁠ symbol and the time counting down are dis-

played on the left in the status bar.

aThe timer counts down.

aWhen the timer duration has elapsed, a note ap-

pears on the display and an audible signal sounds.

3. Once the timer duration has elapsed:

‒Press ⁠ to silence the audible signal manually.

‒To set another timer, press ⁠ and use the rotary

selector to set the duration.

Changing the timer

You can change the timer duration at any time.

1. Press ⁠.

2. Use the rotary selector to change the timer duration.

3. Press ⁠ to confirm.

Cancelling the timer

You can cancel the timer duration at any time.

1. Press ⁠.

2. Use the rotary selector to reset the timer duration to

zero.

3. Press ⁠ to confirm.

10.3 Setting the cooking time

You can set a cooking time for operation of up to 23

hours 59 minutes.

Requirement:The type of heating and a temperature

or setting have been set.

1. Press ⁠.

aThe time-setting options menu opens.

2. Use the rotary selector to set the cooking time.

Rotation direction Default value

Left 10 minutes

Right 30 minutes

The cooking time can be set in one-minute incre-

ments up to one hour, and then in five-minute incre-

ments. The end time is calculated automatically.

3. Press ⁠ to start the operation.

aThe appliance starts to heat and the time starts to

count down.

aOnce the cooking time has elapsed, an audible sig-

nal sounds. "Finished" appears in the status bar.

4. Once the cooking time has elapsed:

‒Press ⁠ to silence the audible signal manually.

‒To set another cooking time, press ⁠ and use

the rotary selector to set the cooking time.

‒To continue without setting a cooking time, press

⁠.

‒When the food is ready, press ⁠ to switch the

appliance off.

Changing the cooking time

You can change the cooking time at any time.

1. Press ⁠.

2. Use the rotary selector to change the cooking time.

3. Then press ⁠ twice.

Cancelling the cooking time

You can cancel the cooking operation time at any time.

1. Press ⁠.

2. Use the rotary selector to reset the cooking time to

zero.

3. ‒To continue without setting a cooking time, press

⁠.

The type of heating and temperature settings are

shown in the display.

10.4 Setting the end time

You can delay the time at which cooking is due to fin-

ish by up to 23 hours and 59 minutes.

Notes

¡In order to achieve good cooking results, do not

delay the end time once the appliance is operating.

¡Food will spoil if you leave it in the cooking com-

partment for too long.

Requirements

¡The type of heating and a temperature or setting

have been set.

¡A cooking time is set.

1. Press ⁠.

2. Press ⁠.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HM678G4S1 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info