Bedienungsanleitung Siemens HR745526N (Seite 16 von 56) (Englisch, Holländisch)

529982

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Care and cleaning

With attentive care and cleaning, your hob and oven will retain

its looks and remain in good working order for a long time. We

will explain here how you should care for and clean them

correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect operation. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Upper glass cover

Before opening the top cover, remove any spills with a cloth.

Use glass cleaner if possible.

For cleaning, remove the top cover. To do this, hold the cover

securely on both sides with both hands and pull it upwards.

If the cover hinges become loose, note the letters marked on

them. The hinge with the letter R must be fitted on the right, and

the hinge with the letter L must be fitted on the left.

After cleaning, re-assemble the top cover following the same

procedure in reverse order.

Only close the top cover once the burners have cooled down.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

When cleaning the hob do not use

■ undiluted washing-up liquid or dishwasher detergent,

■ scouring pads,

■ abrasive cleaning agents such as oven cleaner or stain

remover,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content,

■ scouring pads,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Stainless steel

fronts

Wipe with some washing-up liquid and a damp cloth. Always wipe parallel to the natural grain. Otherwise,

you may scratch the surface. Dry with a soft cloth. Remove flecks of limescale, grease, starch and albumin

(e.g. egg white) immediately. Do not use any abrasive materials, scouring sponges or rough cleaning

cloths. The stainless steel fronts can be polished using a special care product. Follow the manufacturer's

instructions. You can purchase special stainless steel cleaner from our after-sales service or from specialist

retailers.

Enamel surfaces and

lacquered surfaces

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Burners and steel

grid of the gas burn-

ers

Do not clean in the dishwasher. Remove the wire rack and clean with a sponge, washing-up liquid and

some hot water. Remove the burner cup and cap. Clean with a sponge and some hot water and washing-up

liquid. Ensure that the gas outlets on the burner cups are clean and unobstructed. Brush the igniters with a

small, soft brush. The gas burners only work properly when the igniters are clean. Remove food residue

from the burner shells with some washing-up liquid and a damp cloth. Only use a little water. Water must

not be allowed to enter the appliance. Ensure that the nozzle opening does not become blocked or dam-

aged during cleaning. Dry all parts after cleaning and place the burner cover accurately on the burner cup.

If the parts are not positioned accurately, it will be harder to ignite the burner. The burner covers are coated

with black enamel. Due to the high temperatures, discolouration may occur. This will not impair the function

of the burner. Replace the wire rack in the oven.

Electric hob (option) Clean with the hard side of a scouring sponge and some liquid scouring agent. After cleaning, switch the

hob on briefly to dry it. Wet hobs rust over time. Then apply a care product. Always remove spilt liquids and

food residue immediately.

Metal ring of the

electric hob (option)

The metal ring may discolour with time. However, it is possible restore the original colour. Clean the ring

with the hard side of a scouring sponge and some liquid scouring agent. When doing so, make sure that

you do not scour the adjacent surfaces, as this could damage them.

Knobs Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Door glass Can be cleaned with glass cleaner. Do not use any abrasive cleaning agents or sharp metal objects. These

could scratch and damage the surface of the glass panel.

Seal Wipe with a damp cloth. Dry with a soft cloth.

Oven interior Clean with hot water or vinegar solution. For heavy soiling: Only use oven cleaner on cold surfaces.

Glass cover on the

oven light

Clean with some washing-up liquid and a damp cloth. Dry with a soft cloth.

Accessories Soak in hot soapy water. Clean with a brush or a sponge.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HR745526N Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info