Bedienungsanleitung Siemens HX423211 (Seite 18 von 52) (Englisch, Holländisch)

635783

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Troubleshooting

Malfunctions often have simple explanations. Refer to the table

before calling the after-sales service as you may be able to

remedy the fault yourself.

Malfunction table

If your meal is not successful, please refer to section . We have

tested the recipe for you in our cooking studio. Here, you will

find useful cooking tips and tricks for cooking, baking and

roasting.

: Risk of electric shock!

Repairs that are not carried out properly are dangerous.

Repairs must only be performed by one of our after-sales

service technicians.

Replacing the bulb in the oven ceiling light

If the bulb in the oven light fails, it must be replaced. Heat-

resistant, 40 watt spare bulbs can be obtained from our after-

sales service or a specialist retailer. Only use these bulbs.

: Risk of electric shock!

Switch off the circuit breaker in the fuse box.

1. Place a tea towel in the oven when it is cold to prevent

damage.

2. Unscrew the glass cover by turning it anti-clockwise.

3. Replace the bulb with one of the same type.

4. Screw the glass cover back in.

5. Remove the tea towel and switch on the circuit breaker.

Glass cover

You must replace a damaged glass cover. Suitable glass

covers may be obtained from the after-sales service. Please

specify the E number and FD number of your appliance.

After-sales service

Our after-sales service is there for you if your appliance needs

to be repaired. We will always find the right solution in order to

avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and

the production number (FD no.) so that we can provide you with

the correct advice. The rating plate containing these numbers is

found on the side of the oven door. To save time, you can make

a note of the number of your appliance and the telephone

number of the after-sales service in the space below, should it

be required.

Please note that there will be a fee for a visit by a service

technician in the event of a malfunction, even during the

warranty period.

Please find the contact data of all countries in the enclosed

customer service list.

To book an engineer visit and product advice

Rely on the professionalism of the manufacturer. You can

therefore be sure that the repair is carried out by trained service

technicians who carry original spare parts for your appliances.

Malfunction Possible cause Remedy/information

The oven does

not work.

The circuit

breaker is

defective.

Look in the fuse box to see

if the circuit breaker is

defective.

Power cut. Check whether the kitchen

light and other kitchen

appliances are working.

Oven not hot. Dust on the

contacts.

Turn the control knobs sev-

eral times to the left and

right.

The burner

does not ignite.

Power has

failed or igni-

tion plugs are

damp.

Light the gas burner with a

gas lighter or a match.

E no.

FD no.

After-sales service

GB 0344 892 8999

Calls charged at local or mobile rate.

IE 01450 2655

0.03 € per minute at peak. Off peak 0.0088 € per

minute.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HX423211 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info