Bedienungsanleitung Siemens HX74W520 (Seite 18 von 64) (Englisch, Holländisch)

635776

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Care and cleaning

With attentive care and cleaning, your hob and oven will retain

its looks and remain in good working order for a long time. We

will explain here how you should care for and clean them

correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect operation. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

Damage to the various different surfaces caused by using the

wrong cleaning agent can be avoided by observing the

following instructions.

When cleaning the hob do not use

■ undiluted washing-up liquid or dishwasher detergent,

■ scouring pads,

■ abrasive cleaning agents such as oven cleaner or stain

remover,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

When cleaning the oven do not use

■ sharp or abrasive cleaning agents,

■ cleaning agent with a high alcohol content,

■ scouring pads,

■ high-pressure cleaners or steam jets.

■ Do not clean individual parts in the dishwasher.

Wash new sponges thoroughly before first use.

Zone Cleaning agent

Stainless steel sur-

faces*

(depending on

appliance model)

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. On stainless steel surfaces,

always wipe parallel to the natural grain.

Otherwise, you may scratch the surface.

Remove patches and splashes of limes-

cale, grease, starch and albumin (e.g.

egg white) immediately. Corrosion can

form under such patches and splashes.

Special care products suitable for hot

stainless steel surfaces are available

from our after-sales service and from

specialist retailers. Apply a thin layer of

care product with a soft cloth.

Enamel, painted,

plastic and screen-

printed surfaces*

(depending on

appliance model)

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaner or

glass scrapers for cleaning.

Control panel Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth. Do not use glass cleaner or

glass scrapers for cleaning.

* Optional (available for some appliances, depending on the

appliance model)

Upper glass cover*

(depending on

appliance model)

Glass cleaner:

Clean with a soft cloth.

You can remove the upper glass cover

for cleaning. To find out how to do this,

please refer to the section Upper glass

cover.

Rotary knobs

Do not remove.

Hot soapy water:

Clean with a dish cloth and dry with a

soft cloth.

Hob surround Hot soapy water:

Do not clean with a glass scraper, lemon

juice or vinegar.

Gas hob and pan

supports*

(depending on

appliance model)

Hot soapy water.

Use very little water. Water must not be

allowed to enter the appliance through

the base of the burners.

Clean off boiled-over liquids and spilt

food immediately.

You can remove the pan supports.

Cast iron pan supports*:

Do not clean in the dishwasher.

Gas burners*

(depending on

appliance model)

Remove the burner head and cap and

clean with hot soapy water.

Do not clean in the dishwasher.

The gas outlet openings must remain

unobstructed at all times.

Ignition plugs: Small, soft brush.

The gas burners only work properly when

the ignition plugs are dry. Dry all parts

thoroughly. Ensure that they are refitted

correctly.

The burner caps are coated in black

enamel. The colour may change over

time. This does not impair their perfor-

mance.

Electric hotplate*

(depending on

appliance model)

Abrasive materials or sponges:

Briefly heat up the hotplate afterwards,

so that it dries. Hotplates can rust over

time if they remain wet. Apply care prod-

uct to finish.

Clean off boiled-over liquids and spilt

food immediately.

Hotplate ring*

(depending on

appliance model)

Remove yellow to blue iridescent discol-

ouration from the hotplate ring with a

steel care product.

Do not use any abrasive materials that

may scratch surfaces.

Ceramic hob*

(depending on

appliance model)

Care: Protective/care products for

ceramics

Cleaning: Cleaning agents suitable for

ceramics.

Follow the cleaning instructions on the

packaging.

:Glass scraper for stubborn dirt:

Remove the protective cover and clean

using the blade only. Caution: The blade

is very sharp. Risk of injury.

Cover the blade again after cleaning.

Replace damaged blades immediately.

Zone Cleaning agent

* Optional (available for some appliances, depending on the

appliance model)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HX74W520 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info