Bedienungsanleitung Siemens HX74W536N (Seite 20 von 64) (Englisch, Holländisch)

635772

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Upper glass cover

Before opening the top cover, remove any spills with a cloth.

Use glass cleaner if possible.

For cleaning, remove the top cover. To do this, hold the cover

securely on both sides with both hands and pull it upwards.

If the cover hinges become loose, note the letters marked on

them. The hinge with the letter R must be fitted on the right, and

the hinge with the letter L must be fitted on the left.

After cleaning, re-assemble the top cover following the same

procedure in reverse order.

Only close the top cover once the burners have cooled down.

Caution!

When using appliances that have a glass cover with LED

lighting

Do not use any of the following to clean the glass cover

■ Undiluted cleaning agents

■ Abrasive cleaners or cleaning agents with a high alcohol

content

■ Aggressive cleaning agents, such as oven cleaner or stain

remover

■ High-pressure cleaners or steam jet cleaners

■ Harsh or scratchy cleaning agents

■ Hard scouring pads or cleaning sponges

The LED lighting and the hinges of the glass cover on the hob

must not come into contact with liquids.

Liquids will damage the printing, lighting and hinges on the

glass cover and prevent the LED lighting from switching on.

Before cleaning

Remove accessories and cookware from the cooking

compartment.

Cleaning the cooking compartment floor, ceiling and side

walls

Use a dish cloth and hot soapy water or a vinegar solution.

If there are heavy deposits of dirt, use a stainless steel scouring

pad or oven cleaner. Only use when the cooking compartment

is cold. Never treat the self-cleaning surfaces with a scouring

pad or oven cleaner.

Cleaning the self-cleaning surfaces in the cooking

compartment

The back wall in the cooking compartment is coated with a

highly porous ceramic layer. This coating absorbs and

disintegrates splashes from baking and roasting while the oven

is in operation. The higher the temperature and the longer the

oven is in operation, the better the result will be.

If splashes are still visible even after repeated use, proceed as

follows:

1. Clean the floor, ceiling and side panels of the cooking

compartment thoroughly.

2. Set : 3D hot air.

3. With the door closed, heat up the empty oven for

approximately 2 hours at maximum temperature.

The ceramic coating is regenerated. When the cooking

compartment has cooled down, remove the brown or white

residue with water and a soft sponge.

Light discolouration of the coating does not affect automatic

self-cleaning.

Caution!

■ Never use abrasive cleaning agents. You will scratch or

destroy the highly porous coating.

■ Never treat the ceramic coating with oven cleaner. If oven

cleaner accidentally gets onto it, remove it immediately with a

sponge and plenty of water.

Detaching and refitting the rails

The rails can be removed for cleaning. The oven must have

cooled down.

Detaching the rails

1. Lift up the front of the rail

2. and unhook it (figure A).

3. Then pull the whole rail forward

4. and remove it (Fig. B).

Accessories Hot soapy water:

Soak and then clean with a dish cloth or

a brush.

Aluminium baking tray*:

(depending on appliance model)

Dry with a soft cloth.

Do not clean in the dishwasher.

Never use oven cleaner.

To prevent scratches, never touch the

metal surfaces with a knife or a similar

sharp object.

Harsh cleaning products, scratchy

sponges and rough cleaning cloths are

not suitable. Otherwise, you may scratch

the surface.

Rotary spit*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth or a brush. Do not

clean in the dishwasher.

Meat thermometer*

(depending on appliance model)

Hot soapy water:

Clean with a dish cloth or a brush. Do not

clean in the dishwasher.

Plinth drawer*

(depending on

appliance model)

Hot soapy water:

Clean with a dish cloth.

Zone Cleaning agent

* Optional (available for some appliances, depending on the

appliance model)









Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens HX74W536N Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info