17
en
Installation
Install the appliance in a dry, well
ventilated room. The installation location
should neither be exposed to direct
sunlight nor near a heat source, e.g. a
cooker, radiator, etc. If installation next to
a heat source is unavoidable, use a
suitable insulating plate or observe the
following minimum distances to heat
source:
3 cm to an electric cooker.
30 cm to an oil or solid-fuel cooker.
Appliances with fitted handles must be
situated at least 55 mm from the wall on
the hinge side so that the door can be
opened by 90º.
Changing over the
door hinges
We recommend that you have the door
hinges changes over by our customer
service.
Before you start the conversion work,
pull out the mains plug or remove the
fuse.
Attention! Carefully place the
appliance on its back.
Installation in numerical sequence.
1. Changing the door handle. Fig. !5/B
2. Changing over the door hinges.
Fig- !5/A
Aligning the
appliance
Fig. !4
Place the appliance in the designated
location and align.
Adjust the height-adjustable feet with a
screwdriver.
Your new appliance
Details may differ according to the
appliance type, especially with respect
to features.
Fig. Q
A Refrigerator compartment
B Freezer compartment
1–9 Fascia
10 Interior light
11 Shelf
12 Vegetable container
13 Storage compartment
14 Butter and cheese compartment
15 Egg rack
16 Bottle storage compartment
17 Freezer drawer
18 Fan (not all models)
19 Refrigerator compartment sensor
