24
Operation
Light
Fan OFF
Reduce fan speed
Display for fan setting
Fan follow-on
Fan ON and increase speed
Intensive setting
NOTE: It is recommended to switch on the
blower when you start cooking and not to
switch it o again until several minutes after you
have nished cooking. In this way the kitchen
fumes are removed most eectively.
Switching on the fan and selecting the
fan settings
Press button +. If kitchen fumes are thicker,
press button + again. The fan setting is
increased by one.
To switch back by one setting, press
button –.
Switching o the fan
Press button 0.
The displayed 0 goes out shortly
afterwards.
Intensive setting
The Intensive setting
ç
generates maximum
performance. It can be used if thick fumes or
strong odours occur temporarily.
Keep pressing button + until
ç
is displayed.
If the Intensive setting is not switched off
by hand, the fan automatically switches back
to setting 2 after 10 minutes.
Fan follow-on
Press the button.
The fan continues to run at step 1 for 10
minutes, and at the same time a dot flashes in
the display. After this period the fan switches
off automatically.
Light
The light can be switched on and off
independently of the fan.
To adjust the luminosity, hold down the 0
button until the required luminosity is obtained.
Saturation displays
When the grease filters or the activated
carbon filter are saturated, a signal sounds for
6 seconds after the fan is switched off.
Display # or C is lit.
Exhaust-air mode: #
Circulating-air mode: C
The grease filters should now be cleaned or
the activated carbon filter changed.
To cancel the display, press the 0 button.
Switching the acoustic signal o and on
When a button is pressed, an
acknowledgement signal sounds.
To switch off the acoustic signal,
simultaneously press the
0 and + buttons for
approx. 3 seconds. An acknowledgement signal
sounds.
To switch on the acoustic signal, repeat the
process.
