788769
7
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Basic operation en
7
6  Basic operation
6.1 Switching on the appliance
Press ⁠.
aThe appliance starts at fan setting2.
6.2 Switching off the appliance
Press ⁠.
6.3 Selecting a fan setting
Press ⁠or ⁠.
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
Press ⁠ repeatedly until ⁠ appears on the display.
aAfter approx. 6 minutes, the appliance automatically
switches to fan setting 3.
6.5 Switching off intensive mode
Press ⁠ until the required fan setting is reached.
6.6 Switching on the boost function
The boost function is a short-term maximum power set-
ting which can be activated in any fan setting.
Press ⁠.
aAfter approx. 20 seconds, the fan automatically
switches back to the fan setting that was previously
set.
6.7 Switching on the fan run-on, variant1
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press ⁠ until ⁠ appears on the display.
aThe fan run-on starts at fan setting1.
aThe appliance switches off automatically after ap-
prox. 10 minutes.
6.8 Switching on the fan run-on, variant2
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press ⁠
aThe fan run-on starts at fan setting1.
aThe appliance switches off automatically after ap-
prox. 10 minutes.
6.9 Switching off the fan run-on, variant 1
Press ⁠.
6.10 Switching off the fan run-on, variant 2
Press ⁠
6.11 Switching on automatic mode1
The optimum fan setting is set automatically using a
sensor.
Press ⁠.
6.12 Switching off automatic mode1
Press ⁠.
aThe ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
aAutomatic mode runs for a maximum of four hours.
6.13 Sensor control
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on. If the
sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡Factory setting:5
¡Lowest setting:0
¡Highest setting:9
6.14 Setting the sensor control
Requirement:The appliance is switched off.
1. Press and hold ⁠.
aThe setting is displayed after approx. onesecond.
2. Press ⁠or ⁠ to change the setting.
3. Release ⁠ to save the setting.
6.15 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Note:The saturation indicator does not apply for non-
regenerative odour filters that are inserted downstream
of the grease filters. These odour filters must be re-
placed twice a year.
Requirements
¡After the appliance has been switched off, ⁠ ap-
pears in the display for the grease filter.
¡After the appliance has been switched off, ⁠ ap-
pears in the display for the odour filter.
Press ⁠ and ⁠.
aThe saturation indicator is reset.
6.16 Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement:The appliance is switched off.
1. To set circulating-air mode (non-regenerative filter),
press and hold ⁠ and ⁠ until indicator 2 appears
on the display.
1Depending on the appliance specifications
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Siemens LF98BIR55 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Siemens LF98BIR55

Siemens LF98BIR55 Bedienungsanleitung - Deutsch - 20 seiten

Siemens LF98BIR55 Bedienungsanleitung - Holländisch - 24 seiten

Siemens LF98BIR55 Bedienungsanleitung - Französisch - 24 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info