Bedienungsanleitung Siemens LR97CAQ50 (Seite 8 von 24) (Englisch)

788770

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

en Basic operation

7.2 Switching off the appliance

Switch the appliance off when you are not using it.

▶Press ⁠ to switch the appliance off.

aThe appliance switches off. Any functions currently

in progress are cancelled.

7.3 Selecting a fan setting

▶Press ⁠or ⁠.

aThe LED for the set fan setting lights up in the LED

display.

7.4 Switching on intensive mode

If particularly strong odours or vapours develop, you

can use intensive mode.

1. ⁠so oft drücken, bis in der LED-Anzeige die LED4

für die Intensivstufe1leuchtet.

2. ⁠so oft drücken, bis in der LED-Anzeige die LED5

für die Intensivstufe2leuchtet.

aAfter approx. 6 minutes, the appliance automatically

switches to fan setting 3.

7.5 Switching off intensive mode

▶To select a fan setting of your choice, press ⁠.

7.6 Switching on the fan run-on

▶Press ⁠.

aLED1 for the fan setting lights up in the LED dis-

play. LED6 flashes for the fan run-on.

aThe appliance switches off automatically after ap-

prox. 10 minutes.

7.7 Switching off the fan run-on

▶Press ⁠.

aThis immediately stops the fan run-on.

aThe appliance switches to the fan setting that was

previously selected.

7.8 Switching on automatic mode1

The optimum fan setting is set automatically using a

sensor.

▶Press ⁠.

aIn the LED display, LED6 lights up for automatic

mode.

7.9 Switch off automatic mode 1

▶Press ⁠.

aThe appliance switches to the fan setting that was

previously set.

aThe ventilation is automatically ended when the

sensor detects no further change in the room air

quality.

aAutomatic mode runs for a maximum of four hours.

7.10 Intermittent ventilation

With interval ventilation, the ventilation system switches

on and off in the selected setting for the selected time.

Note:This function is only available in the HomeCon-

nectapp.

If the interval ventilation is switched on, LED6 continu-

ously flashes in the LED display for the interval ventila-

tion and the LED for the selected fan setting lights up.

As soon as the ventilation time ends, the LED for the

fan setting you have selected goes out. LED6 contin-

ues to flash.

7.11 Sensor control1

In automatic mode, a sensor in the appliance detects

the intensity of the cooking and roasting fumes. De-

pending on the setting of the sensor sensitivity, the op-

timum fan setting is automatically switched on.

If the sensor control system reacts too weakly or too

strongly, the setting for the sensor sensitivity may

change.

¡Default setting: Fan setting3

¡Lowest setting: Fan setting1

¡Highest setting: Fan setting5

7.12 Setting the sensor control1

Requirement:The appliance is switched off.

1. Press and hold ⁠and ⁠for approx. 3 seconds.

2. Press ⁠or ⁠ to change the setting.

To cancel the setting, press ⁠.

3. To save the setting, press and hold ⁠and ⁠ for ap-

prox. 3 seconds.

Or wait approx. 10seconds until the setting is

saved automatically.

aA signal tone sounds as soon as the selected set-

ting is saved.

7.13 Setting the saturation indicator

The saturation indicator must be adjusted depending

on the filter used.

Requirement:The appliance is switched off.

1. Press and hold ⁠and ⁠for approx.three seconds.

‒To set circulating-air mode (non-regenerable fil-

ter), press ⁠/ ⁠ until LED2 lights up in the LED

display.

‒To set circulating-air mode (non-regenerable fil-

ter), press ⁠/ ⁠ until LED3 lights up in the LED

display.

‒To convert the electronic control back to opera-

tion without the air recirculation filter, press ⁠/ ⁠

until LED1 lights up on the LED display.

2. To save the setting, press and hold ⁠and ⁠for ap-

prox. three seconds.

Or wait approx. 10seconds until the setting is

saved automatically.

To cancel the setting, press ⁠.

aA signal tone sounds as soon as the selected set-

ting is saved.

1Depending on the appliance specifications

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Siemens LR97CAQ50 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Siemens LR97CAQ50

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info